UT53
Airport
Sky Ranch
Moab, Utah

FAA NFDC Information Effective 56-day cycle 04/18/2024 - 6/13/2024

Ops Comms Services Owner Runways IFR Procs Current NOTAMs Remarks

Location

FAA Identifier:UT53
Lat/Lng:38.4943333333, -109.446972222
38-29-39.6000N, 109-26-49.1000W
Estimated by Faa on 05/26/2020
Elevation:4899 feet Estimated by Faa on 05/26/2020
Magnetic Variation:13E,(1985), [9E (2024)]
Sectional:DENVER
From City:7nm S of Moab

Operations

Use:Private
Ownership:Privately owned
Activation:08/1985
Control Tower:no
ARTCC:Denver(ZDV)Denver Center
FSS:Cedar City FSS(CDC)
Wind Indicator:Unlighted
Landing Fee:no

Communications

Services

Based Aircraft

Single Engine GA:1
Total:1

Annual Operations

Total:0

Ownership

Owner:Moab Development Trust
Po Box 99
Moab, Ut 84532
303-419-1192
Manager:John Ramsey
Po Box 1245
Moab, Ut 84532
435-200-3363

Runways

Runways:12/30

Runway 12/30

Length:3690 feet
by Ado on 05/02/2019
Width:60 feet
Surface:Asphalt / Bituminous Concrete, Good Condition
Surface Treatment:NONE
End 12 End 30
True Alignment:133,(124 Magnetic)313,(304 Magnetic)
Runway Markings:NoneNone
Elevation at End:4816.0' MSL4899.0' MSL
Elevation at Touchdown Zone:4886.0' MSL4899.0' MSL
Objects affecting Navigable Airspace (CFR part 77):Utility runway with a visual approachUtility runway with a visual approach

Procedures

NOTAMs

Additional Remarks

Helicopter Operations on South End.
for Cd Contact Denver ARTCC at 303-651-4257.
(Contact Title) Email - GINA@BZREZ.COM

This information is current as of the date at the top of the page. These pages are valid for all US airports, based on information from FAA National Flight Data Center. Weather information is provided based on AvnWx Data Sources. NOTAM information is from FAA's NAIMES data portal.

As with most information on this website, this page is generated based on FAA data, with automatic translations done via computer. You can also directly read the A/FD via the green icon link at the top of the page, which is the FAA text, and sometimes provides a different translation of codes. Please email me (using link at top-right of this page) if you see information which is confusing, misleading, or wrong....Or have suggestions for additions/changes.

Comments from the user community are clearly noted as such this page, are for informational purposes only, may be wrong and/or out-of-date, and must not be used as a sole source for critical decision making. See Privacy Policy and Conditions of Use.