| VG20
Airport
|
Onley
|
|
Onley, Virginia
|
|
|
|
FAA NFDC Information Effective 56-day cycle 05/02/2013 - 6/27/2013
| FAA Identifier: | VG20 (Victor-Golf-Two-Zero) |
| Lat/Lng: |
37.6751311111, -75.7099288889
37-40-30.4720N, 075-42-35.7440W
Estimated
|
| Elevation: |
45 feet
Estimated
|
| Magnetic Variation: |
10W,
(1985),
[-11W (2013)]
|
| Sectional: |
WASHINGTON
|
| From City: |
1nm
SE of Onley
|
| Use: |
Private
|
| Ownership: |
Privately owned
|
| Activation: |
04/1972
|
| Control Tower: |
no
|
| ARTCC: |
Washington Center
(ZDC)
|
| FSS: |
Leesburg FSS
(DCA)
|
| Wind Indicator: |
Unlighted
|
| Landing Fee: |
no
|
| Airframe Repair: |
None
|
| Powerplant Repair: |
None
|
| Bottled Oxygen: |
None
|
| Bulk Oxygen: |
None
|
| Transient Storage: |
Hanger,Tie-Down
|
| Other Services: |
Crop Dusting
|
| Single Engine GA: |
3
|
| Total: |
3
|
|
|
| Owner: |
a. Joseph Mc Math
Po Box 188
Onley, Va 23418
804-787-4842
|
| Manager: |
a. Joseph Mc Math
Po Box 188
Onley, Va 23418
804-787-4842
|
|
Runway 06/24
| Length: |
2900 feet
|
| Width: |
55 feet
|
| Surface: |
Grass / Sod, Good Condition
|
|
End 06 |
End 24 |
| Objects: |
Trees
|
Road
Also Has a +35' Powerline 60' from Threshold on Centerline.
|
| Objects affecting Navigable Airspace (CFR part 77): |
Utility runway with a visual approach
|
Utility runway with a visual approach
|
| Object Clearance Slope: |
1:1
|
1:1
|
| Object Height: |
60' AGL
|
10' AGL
|
| Object Distance: |
35' Left of centerline
|
30' Right of centerline
|
This information is current as of the date at the top of the page. These
pages are valid for all US airports, based on information from FAA National Flight Data Center.
Weather information
is provided based on AvnWx Data Sources. NOTAM information
is from FAA's NAIMES data portal.
As with most information on this website, this page is generated based on FAA data, with
automatic translations done via computer. You can also directly read the A/FD via
the green icon link at the top of the page, which is the FAA text, and
sometimes provides a different translation of codes. Please email
me (using link at top-right of this page) if you see information which is confusing,
misleading, or wrong....Or have suggestions for additions/changes.
Comments from the user community are clearly noted as such this page, are for informational purposes only, may
be wrong and/or out-of-date, and must not be used as a sole source
for critical decision making. See Privacy Policy and
Conditions of Use.