WY38
Airport
Orchard Ranch
Ten Sleep, Wyoming

FAA NFDC Information Effective 56-day cycle 04/18/2024 - 6/13/2024

Ops Comms Services Owner Runways IFR Procs Current NOTAMs Remarks

Location

FAA Identifier:WY38
Lat/Lng:43.6235705556, -107.407573611
43-37-24.8540N, 107-24-27.2650W
Estimated
Elevation:5277 feet Estimated
Magnetic Variation:13E,(1985), [9E (2024)]
Sectional:CHEYENNE
From City:26nm S of Ten Sleep

Operations

Use:Private
Airspace Analysis:NOT ANALYZED
Record Purposes only.
Ownership:Privately owned
Control Tower:no
ARTCC:Salt Lake City(ZLC)Salt Lake City Center
FSS:Casper FSS(CPR)
Wind Indicator:Unlighted
Landing Fee:no

Communications

Services

Fuel:Grade 100 Gasoline (green)
Airframe Repair:None
Powerplant Repair:None

Based Aircraft

Single Engine GA:1
Total:1

Annual Operations

Total:0

Ownership

Owner:Orchard Ranch Llc
3831 Rd 82
Ten Sleep, Wy 82442
Manager:April Nelson
3831 Rd 82
Ten Sleep, Wy 82442
(307) 366-2456

Runways

Runways:04/22

Runway 04/22

Length:3300 feet
Width:50 feet
Surface:Grass / Sod
Surface Treatment:NONE
End 04 End 22
Right Hand Pattern:Yes 
Elevation at End:5277.0' MSL 
Objects:Road
Runway 04 Road W of Hangar Crosses SW End Runway 04, Powerline W of Road.
 

Procedures

NOTAMs

Additional Remarks

Fence 100' E & Parallel to Runway.
Mtn 1 Mile NE of Runway 04.
for Cd Contact Salt Lake ARTCC at 801-320-2568.

This information is current as of the date at the top of the page. These pages are valid for all US airports, based on information from FAA National Flight Data Center. Weather information is provided based on AvnWx Data Sources. NOTAM information is from FAA's NAIMES data portal.

As with most information on this website, this page is generated based on FAA data, with automatic translations done via computer. You can also directly read the A/FD via the green icon link at the top of the page, which is the FAA text, and sometimes provides a different translation of codes. Please email me (using link at top-right of this page) if you see information which is confusing, misleading, or wrong....Or have suggestions for additions/changes.

Comments from the user community are clearly noted as such this page, are for informational purposes only, may be wrong and/or out-of-date, and must not be used as a sole source for critical decision making. See Privacy Policy and Conditions of Use.