X33
Airport
Doniphan Municipal
Doniphan, Missouri

FAA NFDC Information Effective 56-day cycle 07/21/2016 - 9/15/2016

Ops Comms Services Owner Runways IFR Procs Current NOTAMs Remarks

Location

FAA Identifier:X33
Lat/Lng: 36.6938611111, -90.7844722222
36-41-37.9000N, 090-47-04.1000W
Estimated by FAA-EST on 04/25/2007
Elevation: 635 feet Estimated
Magnetic Variation: 03E, (1985), [-1W (2016)]
Sectional: ST LOUIS
From City: 5nm NNE of Doniphan

Operations

Use: Open to the public
Airspace Analysis: See Letter Dec 30, 1988.
Ownership: Publicly owned
Activation: 11/1989
Control Tower: no
ARTCC: Memphis Center (ZME)
FSS: Saint Louis FSS (STL)
NOTAMs and Weather: STL NOTAM-D service at airport
Wind Indicator: Unlighted
Segmented Circle: yes
Lights: Activate LIRL Runway 07/25 - CTAF.
Landing Fee: no

Communications

CTAF: 122.900

Services

Airframe Repair: Minor
Powerplant Repair: Minor
Transient Storage: Tie-Down

Based Aircraft

Single Engine GA: 7
Multi Engine GA: 2
Helicopter GA: 2
Ultralights: 1
Total: 12

Annual Operations

For year ending: 12/31/2015
AirTaxi: 50
Local GA (< 20 miles): 1000
Non-local GA: 1050
Military Operations: 50
Total: 2150

Ownership

Owner: City of Doniphan
124 Jefferson St
Doniphan, Mo 63935
573-996-2623
Manager: Brian Byrd
Co-Airport Manager Lonnie Reid Lives on Airport (573) 996-9494.
124 Jefferson St
Doniphan, Mo 63935
573-996-2623

Runways

Runways: 07/25

Runway 07/25

Length: 2560 feet
Width: 57 feet
Width Variance 57-60 Ft.
Surface: Asphalt / Bituminous Concrete, Fair Condition
Runway Lights Edge Intensity: Low Intensity
Runway 7 Threshold Ltg Non-Standard Due to Location, Color of Lights, Number of Lights.
End 07 End 25
Right Hand Pattern:   Yes
Runway Markings: Basic, Runway 7 Displaced Threshold Non-Standard Due to No Markings Between Runway Demarcation Bar and Runway Threshold Bar. Threshold and Dthr Indicated by One Non-Standard White Light on Each Side of Threshold Bar. End Taxiway Prior to Runway not Marked, Non-Standard Red Lights at End of Pavement, Aprx 300 Ft from Runway 7 Threshold., Fair Condition Basic, Runway 25 End Taxiway Prior to Runway not Marked, Nonstandard Red Lights at End of Pavement Aprx 240 Ft from Runway 25 Threshold., Fair Condition
Displaced Threshold Distance: 457'  
Elevation at End: 620.0' MSL 620.0' MSL
Objects: Trees Trees
Objects affecting Navigable Airspace (CFR part 77): Utility runway with a visual approach Utility runway with a visual approach
Object Clearance Slope: 2:1
Approach Ratio 15:1 to Displaced Threshold; +60 Ft Tree 980 Ft 168 Ft R and L;
2:1
Object Height: 35' AGL 15' AGL
Object Distance: 302' Along centerline
125'Left and Right of centerline
242' Along centerline
23' Left of centerline
Other Objects: +1-2 Ft Ground 0-75 Ft from Runway Relocated Threshold 100-125 Ft L. Runway 25 +1-2 Brush & High Ground; 0-200 Ft from Runway End; 100-125 Ft R; +1-10 Ft Brush; Fence & High Ground; 100-200 Ft from Runway End; 100-125 Ft L.

Procedures

NOTAMs

Additional Remarks

Wildlife may be on Runways Morning & Evening Hrs.
Segmented Circle Traffic Pattern Indicator for Runway 25 is Incorrect, Does not Indicate Right Traffic.

This information is current as of the date at the top of the page. These pages are valid for all US airports, based on information from FAA National Flight Data Center. Weather information is provided based on AvnWx Data Sources. NOTAM information is from FAA's NAIMES data portal.

As with most information on this website, this page is generated based on FAA data, with automatic translations done via computer. You can also directly read the A/FD via the green icon link at the top of the page, which is the FAA text, and sometimes provides a different translation of codes. Please email me (using link at top-right of this page) if you see information which is confusing, misleading, or wrong....Or have suggestions for additions/changes.

Comments from the user community are clearly noted as such this page, are for informational purposes only, may be wrong and/or out-of-date, and must not be used as a sole source for critical decision making. See Privacy Policy and Conditions of Use.