Thorny Woods
Caddo Mills, Texas

FAA NFDC Information Effective 56-day cycle 10/15/2015 - 12/10/2015

Ops Comms Services Owner Runways IFR Procs Current NOTAMs Remarks


FAA Identifier:XA33
Lat/Lng: 32.9587027778, -96.2644222222
32-57-31.3300N, 096-15-51.9200W
Estimated by OWNER on 08/22/2003
Elevation: 540 feet Estimated by OWNER on 08/22/2003
Magnetic Variation: [3E (2015)]
From City: 5nm S of Caddo Mills


Use: Private
Ownership: Privately owned
Activation: 03/2005
Control Tower: no
ARTCC: Fort Worth Center (ZFW)
FSS: Fort Worth FSS (FTW)
Wind Indicator: Lighted
Landing Fee: no



Based Aircraft

Single Engine GA: 1
Ultralights: 1
Total: 2

Annual Operations

Total: 0


Owner: John Carpenter & Brad Maynard
1160 Brook St NE
Address Shown in Owner Address is for Co-Owner Mr. John Carpenter.
Palm Bay, Fl 32905
Manager: John Carpenter & Brad Maynard
418 Skyline Dr
Address Shown in Manager Address is for Co-Owner Mr. Brad Maynard.
Murphy, Tx 75094


Runways: 17/35

Runway 17/35

Length: 1700 feet
by Owner on 08/22/2003
Width: 75 feet
Surface: Grass / Sod
End 17 End 35
Right Hand Pattern:   Yes
Objects: Powerline Trees
Objects affecting Navigable Airspace (CFR part 77): Utility runway with a visual approach Utility runway with a visual approach
Object Height: 25' AGL 25' AGL
Object Distance: 500' Along centerline 500' Along centerline



Additional Remarks

This information is current as of the date at the top of the page. These pages are valid for all US airports, based on information from FAA National Flight Data Center. Weather information is provided based on AvnWx Data Sources. NOTAM information is from FAA's NAIMES data portal.

As with most information on this website, this page is generated based on FAA data, with automatic translations done via computer. You can also directly read the A/FD via the green icon link at the top of the page, which is the FAA text, and sometimes provides a different translation of codes. Please email me (using link at top-right of this page) if you see information which is confusing, misleading, or wrong....Or have suggestions for additions/changes.

Comments from the user community are clearly noted as such this page, are for informational purposes only, may be wrong and/or out-of-date, and must not be used as a sole source for critical decision making. See Privacy Policy and Conditions of Use.