| 00OK
Airport
|
Gull Bay Landing
|
|
Sandsprings, Oklahoma
|
|
|
|
FAA NFDC Information Effective 56-day cycle 05/18/2023 - 7/13/2023
| FAA Identifier: | 00OK (Zero-Zero-Oscar-Kilo) |
|---|
| Lat/Lng: | 36.198918, -96.217682
36-11-56.1048N, 096-13-03.6552W
Estimated by Owner on 01/16/2018 |
|---|
| Elevation: | 960 feet Estimated by Owner on 01/16/2018 |
|---|
| Magnetic Variation: | [2E (2023)] |
|---|
| Sectional: | KANSAS CITY |
|---|
| From City: | 7nm WNW of Sandsprings |
|---|
| Use: | Private |
|---|
| Ownership: | Privately owned |
|---|
| Activation: | 05/2018 |
|---|
| Control Tower: | no |
|---|
| ARTCC: | Kansas City(ZKC)Kansas City Center |
|---|
| FSS: | Mc Alester FSS(MLC) |
|---|
| Wind Indicator: | Lighted |
|---|
| Landing Fee: | no |
|---|
| Single Engine GA: | 1 |
|---|
| Multi Engine GA: | 1 |
|---|
| Helicopter GA: | 1 |
|---|
| Gliders: | 1 |
|---|
| Total: | 4 |
|---|
|
|
| Owner: | Carl Black
408 Bay Shore Drive
Sand Springs, Ok 74063
918-245-1642 |
|---|
| Manager: | Carl Black
408 Bay Shore Drive
Sand Springs, Ok 74063
918-245-1642 |
|---|
|
Runway 17/35
| Length: | 2200 feet
by Owner on 01/16/2018 |
|---|
| Width: | 60 feet |
|---|
| Surface: | Grass / Sod, Natural Soil, Fair Condition |
|---|
|
End 17 |
End 35 |
|---|
| Right Hand Pattern: | Yes | Yes |
|---|
| Objects affecting Navigable Airspace (CFR part 77): | Utility runway with a visual approach | Utility runway with a visual approach |
|---|
| • | for Cd Contact Tulsa Approach at 918-831-6714/6720. |
|---|
This information is current as of the date at the top of the page. These
pages are valid for all US airports, based on information from FAA National Flight Data Center.
Weather information
is provided based on AvnWx Data Sources. NOTAM information
is from FAA's NAIMES data portal.
As with most information on this website, this page is generated based on FAA data, with
automatic translations done via computer. You can also directly read the A/FD via
the green icon link at the top of the page, which is the FAA text, and
sometimes provides a different translation of codes. Please email
me (using link at top-right of this page) if you see information which is confusing,
misleading, or wrong....Or have suggestions for additions/changes.
Comments from the user community are clearly noted as such this page, are for informational purposes only, may
be wrong and/or out-of-date, and must not be used as a sole source
for critical decision making. See Privacy Policy and
Conditions of Use.
