| 04TT
Airport
|
Brushy Creek Ranch
|
|
Utopia, Texas
|
|
|
|
FAA NFDC Information Effective 56-day cycle 11/27/2025 - 1/22/2026
| FAA Identifier: | 04TT (Zero-Four-Tango-Tango) |
|---|
| Lat/Lng: | 29.7136956944, -99.5456229444
29-42-49.3045N, 099-32-44.2426W
Estimated by Owner on 06/13/2024 |
|---|
| Elevation: | 1550 feet Estimated by Owner on 06/13/2024 |
|---|
| Magnetic Variation: | [4E (2025)] |
|---|
| Sectional: | SAN ANTONIO |
|---|
| From City: | 6nm N of Utopia |
|---|
| Use: | Private |
|---|
| Ownership: | Privately owned |
|---|
| Activation: | 02/2021 |
|---|
| Control Tower: | no |
|---|
| ARTCC: | Houston(ZHU)Houston Center |
|---|
| FSS: | San Angelo FSS(SJT) |
|---|
| Wind Indicator: | Lighted |
|---|
| Landing Fee: | no |
|---|
|
|
|
| Owner: | Davis Partners Limited
Attn: Bob Duke
Po Box 271
Midland, Tx 79702
432-683-8001
FDAVIS@4DRANCH.COM |
|---|
| Manager: | Bob Duke
1029 Panther Hill Road
Utopia, Tx 78884
830-486-8612
BOBDUKE@HEDLOCINV.COM |
|---|
|
Runway 18/36
| Length: | 5134 feet
by Owner on 06/13/2024 |
|---|
| Width: | 55 feet |
|---|
| Surface: | Asphalt / Bituminous Concrete, Good Condition |
|---|
| Surface Treatment: | NONE |
|---|
|
End 18 |
End 36 |
|---|
| Runway Markings: | Basic,Fair Condition | Basic,Fair Condition |
|---|
| Elevation at End: | 1550.5' MSL | 1521.7' MSL |
|---|
| Objects affecting Navigable Airspace (CFR part 77): | Utility runway with a nonprecision approach | Utility runway with a nonprecision approach |
|---|
This information is current as of the date at the top of the page. These
pages are valid for all US airports, based on information from FAA National Flight Data Center.
Weather information
is provided based on AvnWx Data Sources. NOTAM information
is from FAA's NAIMES data portal.
As with most information on this website, this page is generated based on FAA data, with
automatic translations done via computer. You can also directly read the A/FD via
the green icon link at the top of the page, which is the FAA text, and
sometimes provides a different translation of codes. Please email
me (using link at top-right of this page) if you see information which is confusing,
misleading, or wrong....Or have suggestions for additions/changes.
Comments from the user community are clearly noted as such this page, are for informational purposes only, may
be wrong and/or out-of-date, and must not be used as a sole source
for critical decision making. See Privacy Policy and
Conditions of Use.
