0OK3
Airport
|
Mckinley Ranch
|
Geary, Oklahoma
|
|
|
|
FAA NFDC Information Effective 56-day cycle 12/26/2024 - 2/20/2025
FAA Identifier: | 0OK3 (Zero-Oscar-Kilo-Three) |
---|
Lat/Lng: | 35.6194938889, -98.5225705556 35-37-10.1780N, 098-31-21.2540W Estimated |
---|
Elevation: | 1420 feet Estimated |
---|
Magnetic Variation: | 07E,(1985), [4E (2024)] |
---|
Sectional: | DALLAS-FT WORTH |
---|
From City: | 8nm W of Geary |
---|
Use: | Private |
---|
Airspace Analysis: | NOT ANALYZED Pre Dates the Act. |
---|
Ownership: | Privately owned |
---|
Activation: | 09/1971 |
---|
Control Tower: | no |
---|
ARTCC: | Fort Worth(ZFW)Fort Worth Center |
---|
FSS: | Mc Alester FSS(MLC) |
---|
Wind Indicator: | Unlighted |
---|
Landing Fee: | no |
---|
Airframe Repair: | None |
---|
Powerplant Repair: | None |
---|
|
|
Owner: | Mark Mckinley Rt 1 Box 67 Geary, Ok 73040 405-884-2628 |
---|
Manager: | Mark Mckinley Rt 1 Box 67 Geary, Ok 73040 405-884-2628 |
---|
|
Runway 16/34
Length: | 5000 feet |
---|
Width: | 30 feet |
---|
Surface: | Asphalt / Bituminous Concrete |
---|
Surface Treatment: | NONE |
---|
|
End 16 |
End 34 |
---|
Right Hand Pattern: | Yes | |
---|
Objects affecting Navigable Airspace (CFR part 77): | Utility runway with a visual approach | Utility runway with a visual approach |
---|
• | for Cd Contact Fort Worth ARTCC at 817-858-7584. |
---|
This information is current as of the date at the top of the page. These
pages are valid for all US airports, based on information from FAA National Flight Data Center.
Weather information
is provided based on AvnWx Data Sources. NOTAM information
is from FAA's NAIMES data portal.
As with most information on this website, this page is generated based on FAA data, with
automatic translations done via computer. You can also directly read the A/FD via
the green icon link at the top of the page, which is the FAA text, and
sometimes provides a different translation of codes. Please email
me (using link at top-right of this page) if you see information which is confusing,
misleading, or wrong....Or have suggestions for additions/changes.
Comments from the user community are clearly noted as such this page, are for informational purposes only, may
be wrong and/or out-of-date, and must not be used as a sole source
for critical decision making. See Privacy Policy and
Conditions of Use.