10MT
Airport
 Hoolie
Haxby, Montana

FAA NFDC Information Effective 56-day cycle 04/18/2024 - 6/13/2024

Ops Comms Services Owner Runways IFR Procs Current NOTAMs Remarks

Location

FAA Identifier:10MT (One-Zero-Mike-Tango)
Lat/Lng:47.833345, -106.483928889
47-50-00.0420N, 106-29-02.1440W
Estimated
Elevation:2526 feet Surveyed
Magnetic Variation:14E,(1985), [9E (2024)]
Sectional:BILLINGS
From City:4nm NW of Haxby

Operations

Use:Private
Ownership:Privately owned
Activation:10/1953
Control Tower:no
ARTCC:Salt Lake City(ZLC)Salt Lake City Center
FSS:Great Falls FSS(GTF)
Wind Indicator:None
Landing Fee:no

Communications

Services

Airframe Repair:None
Powerplant Repair:None
Bottled Oxygen:None
Bulk Oxygen:None

Based Aircraft

Total:0

Annual Operations

Total:0

Ownership

Owner:Hoolie Edwards
Jordan, Mt 59337
406-557-2578
Manager:Hoolie Edwards
Jordan, Mt 59337
406-557-2578

Runways

Runways:E/W
N/S
NW/SE

Runway E/W

Length:1500 feet
Width:60 feet
Surface:Grass / Sod
Surface Treatment:NONE
End E End W

Runway N/S

Length:2000 feet
Width:60 feet
Surface:Grass / Sod
Surface Treatment:NONE
End N End S

Runway NW/SE

Length:1600 feet
Width:60 feet
Surface:Grass / Sod
Surface Treatment:NONE
End NW End SE

Procedures

NOTAMs

Additional Remarks

•for Cd Contact Salt Lake ARTCC at 801-320-2568.
•(Airport Status) Airport Closed Indefinitely.

This information is current as of the date at the top of the page. These pages are valid for all US airports, based on information from FAA National Flight Data Center. Weather information is provided based on AvnWx Data Sources. NOTAM information is from FAA's NAIMES data portal.

As with most information on this website, this page is generated based on FAA data, with automatic translations done via computer. You can also directly read the A/FD via the green icon link at the top of the page, which is the FAA text, and sometimes provides a different translation of codes. Please email me (using link at top-right of this page) if you see information which is confusing, misleading, or wrong....Or have suggestions for additions/changes.

Comments from the user community are clearly noted as such this page, are for informational purposes only, may be wrong and/or out-of-date, and must not be used as a sole source for critical decision making. See Privacy Policy and Conditions of Use.