11NC
Heliport
Sprint/Midatlantic Telecom
Youngsville, North Carolina

FAA NFDC Information Effective 56-day cycle 03/21/2024 - 5/16/2024

Ops Comms Services Owner Runways IFR Procs Current NOTAMs Remarks

Location

FAA Identifier:11NC (One-One-November-Charlie)
Lat/Lng:36.0215861111, -78.5167972222
36-01-17.7100N, 078-31-00.4700W
Estimated by Faa-Est Imagery on 10/24/2016
Elevation:427 feet Estimated
Magnetic Variation:08W,(1990), [-10W (2024)]
Sectional:WASHINGTON
From City:2nm SW of Youngsville

Operations

Use:Private
Airspace Analysis:CONDITIONAL
Provided VFR/Pr Use; All Approach/Departure Operations are from 070-100 Deg and from 245-275 Deg; Area Appropriately Marked; a Wind Indicator is Mntnd.
Ownership:Privately owned
Activation:06/1993
Attended:All year Mon-Fri 0800-1700 (local)
Control Tower:no
ARTCC:Washington(ZDC)Washington Center
FSS:Raleigh FSS(RDU)
Wind Indicator:Unlighted
Lights:for Perimeter Lights & Heliplasi Call 919-554-5365.
Landing Fee:no

Communications

Services

Based Aircraft

Helicopter GA:1
Total:1

Annual Operations

Total:0

Ownership

Owner:Sprint/Midatlantic Telecom
14111 Capital Blvd
Wake Forest, Nc 27587-5900
919-554-5363
Manager:Ronald D. Hardin
14111 Capital Blvd
Wake Forest, Nc 27587-5900
919-554-5365

Runways

Runways:H1

Runway H1

Length:40 feet
Width:40 feet
Surface:Porland Cement Concrete
Surface Treatment:NONE
Runway Lights Edge Intensity:Perimeter

Procedures

NOTAMs

Additional Remarks

Heliport Has a Heliplasi.
for Cd Contact Washington ARTCC at 703-771-3587.

This information is current as of the date at the top of the page. These pages are valid for all US airports, based on information from FAA National Flight Data Center. Weather information is provided based on AvnWx Data Sources. NOTAM information is from FAA's NAIMES data portal.

As with most information on this website, this page is generated based on FAA data, with automatic translations done via computer. You can also directly read the A/FD via the green icon link at the top of the page, which is the FAA text, and sometimes provides a different translation of codes. Please email me (using link at top-right of this page) if you see information which is confusing, misleading, or wrong....Or have suggestions for additions/changes.

Comments from the user community are clearly noted as such this page, are for informational purposes only, may be wrong and/or out-of-date, and must not be used as a sole source for critical decision making. See Privacy Policy and Conditions of Use.