2XA7
Airport
Tailwheel
Longview, Texas

FAA NFDC Information Effective 56-day cycle 03/21/2024 - 5/16/2024

Ops Comms Services Owner Runways IFR Procs Current NOTAMs Remarks

Location

FAA Identifier:2XA7
Lat/Lng:32.615, -94.7655555556
32-36-54.0000N, 094-45-56.0000W
Estimated by Owner on 09/06/2006
Elevation:360 feet Estimated by Owner on 09/06/2006
Magnetic Variation: [1E (2024)]
Sectional:MEMPHIS
From City:7nm N of Longview

Operations

Use:Private
Ownership:Privately owned
Activation:08/2005
Control Tower:no
ARTCC:Fort Worth(ZFW)Fort Worth Center
FSS:Fort Worth FSS(FTW)
Wind Indicator:Lighted
Landing Fee:no

Communications

Services

Based Aircraft

Single Engine GA:2
Total:2

Annual Operations

Total:0

Ownership

Owner:Edward Rucker
408 Mill Creek Rd
Longview, Tx 75605
903-663-5818
Manager:Edward Rucker
408 Mill Creek Rd
Longview, Tx 75605
903-663-5818

Runways

Runways:15/33

Runway 15/33

Length:2100 feet
by Owner on 09/06/2006
Width:40 feet
Surface:Grass / Sod, Fair Condition
Surface Treatment:NONE
End 15 End 33
Objects:TreesTrees
Objects affecting Navigable Airspace (CFR part 77):Utility runway with a visual approachUtility runway with a visual approach
Object Height:25' AGL30' AGL
Object Distance:10' Along centerline10' Along centerline

Procedures

NOTAMs

Additional Remarks

Owner Desires Airport not be Charted.
Towers All Quadrants.
for Cd Contact Fort Worth ARTCC at 817-858-7584.

This information is current as of the date at the top of the page. These pages are valid for all US airports, based on information from FAA National Flight Data Center. Weather information is provided based on AvnWx Data Sources. NOTAM information is from FAA's NAIMES data portal.

As with most information on this website, this page is generated based on FAA data, with automatic translations done via computer. You can also directly read the A/FD via the green icon link at the top of the page, which is the FAA text, and sometimes provides a different translation of codes. Please email me (using link at top-right of this page) if you see information which is confusing, misleading, or wrong....Or have suggestions for additions/changes.

Comments from the user community are clearly noted as such this page, are for informational purposes only, may be wrong and/or out-of-date, and must not be used as a sole source for critical decision making. See Privacy Policy and Conditions of Use.