32XS
Heliport
 Cedar Circle
Midlothian, Texas

FAA NFDC Information Effective 56-day cycle 04/18/2024 - 6/13/2024

Ops Comms Services Owner Runways IFR Procs Current NOTAMs Remarks

Location

FAA Identifier:32XS
Lat/Lng:32.4615055556, -97.0087
32-27-41.4200N, 097-00-31.3200W
Estimated
Elevation:750 feet Estimated
Magnetic Variation:06E,(1995), [3E (2024)]
Sectional:DALLAS-FT WORTH
From City:2nm SW of Midlothian

Operations

Use:Private
Ownership:Privately owned
Activation:06/1997
Attended:Continuous
Control Tower:no
ARTCC:Fort Worth(ZFW)Fort Worth Center
FSS:Fort Worth FSS(FTW)
Wind Indicator:Unlighted
Landing Fee:no

Communications

Services

Based Aircraft

Helicopter GA:1
Total:1

Annual Operations

Total:0

Ownership

Owner:Dennis Lauterbach
1161 Cedar Dr
Midlothian, Tx 76065-5447
972-723-5364
Manager:Dennis Lauterbach
1161 Cedar Dr
Midlothian, Tx 76065-5447
972-723-5364

Runways

Runways:H1

Runway H1

Length:50 feet
Width:50 feet
Surface:Porland Cement Concrete
Surface Treatment:NONE

Procedures

NOTAMs

Additional Remarks

•for Cd Contact Regional Approach at 972-615-2799.

This information is current as of the date at the top of the page. These pages are valid for all US airports, based on information from FAA National Flight Data Center. Weather information is provided based on AvnWx Data Sources. NOTAM information is from FAA's NAIMES data portal.

As with most information on this website, this page is generated based on FAA data, with automatic translations done via computer. You can also directly read the A/FD via the green icon link at the top of the page, which is the FAA text, and sometimes provides a different translation of codes. Please email me (using link at top-right of this page) if you see information which is confusing, misleading, or wrong....Or have suggestions for additions/changes.

Comments from the user community are clearly noted as such this page, are for informational purposes only, may be wrong and/or out-of-date, and must not be used as a sole source for critical decision making. See Privacy Policy and Conditions of Use.