| 36XS
Airport
|
Mill Iron Ranch South
|
|
Wellington, Texas
|
|
|
|
FAA NFDC Information Effective 56-day cycle 04/18/2024 - 6/13/2024
| FAA Identifier: | 36XS |
|---|
| Lat/Lng: | 34.8918055556, -100.120319444
34-53-30.5000N, 100-07-13.1500W
Estimated by Owner on 11/14/2011 |
|---|
| Elevation: | 2097 feet Estimated by Owner on 11/14/2011 |
|---|
| Magnetic Variation: | [5E (2024)] |
|---|
| Sectional: | DALLAS-FT WORTH |
|---|
| From City: | 6nm NE of Wellington |
|---|
| Use: | Private |
|---|
| Airspace Analysis: | CONDITIONAL
Provided VFR Operations and Pvt Use only. |
|---|
| Ownership: | Privately owned |
|---|
| Activation: | 04/2013 |
|---|
| Control Tower: | no |
|---|
| ARTCC: | Fort Worth(ZFW)Fort Worth Center |
|---|
| FSS: | Fort Worth FSS(FTW) |
|---|
| Wind Indicator: | Lighted |
|---|
| Landing Fee: | no |
|---|
|
|
|
| Owner: | Mill Iron Ranches South Limited
8235 Douglas Ave, Suite 1300, Suite 1300
Dallas, Tx 75225
214-360-9600 |
|---|
| Manager: | Al Allred
8235 Douglas Ave, Suite 1300, Suite 1300
Dallas, Tx 75225
214-360-9600 |
|---|
|
Runway 17/35
| Length: | 2500 feet
by Owner on 11/14/2011 |
|---|
| Width: | 40 feet |
|---|
| Surface: | Grass / Sod |
|---|
| Surface Treatment: | NONE |
|---|
|
End 17 |
End 35 |
|---|
| Right Hand Pattern: | | Yes |
|---|
| Objects affecting Navigable Airspace (CFR part 77): | Utility runway with a visual approach | Utility runway with a visual approach |
|---|
| • | for Cd Contact Fort Worth ARTCC at 817-858-7584. |
|---|
This information is current as of the date at the top of the page. These
pages are valid for all US airports, based on information from FAA National Flight Data Center.
Weather information
is provided based on AvnWx Data Sources. NOTAM information
is from FAA's NAIMES data portal.
As with most information on this website, this page is generated based on FAA data, with
automatic translations done via computer. You can also directly read the A/FD via
the green icon link at the top of the page, which is the FAA text, and
sometimes provides a different translation of codes. Please email
me (using link at top-right of this page) if you see information which is confusing,
misleading, or wrong....Or have suggestions for additions/changes.
Comments from the user community are clearly noted as such this page, are for informational purposes only, may
be wrong and/or out-of-date, and must not be used as a sole source
for critical decision making. See Privacy Policy and
Conditions of Use.
