| 3IL6
Heliport
|
Pinckneyville Correctional Center
|
|
Pinckneyville, Illinois
|
|
|
|
FAA NFDC Information Effective 56-day cycle 04/18/2024 - 6/13/2024
| FAA Identifier: | 3IL6 (Three-India-Lima-Six) |
|---|
| Lat/Lng: | 38.0839361111, -89.3278305556
38-05-02.1700N, 089-19-40.1900W
Estimated by Faa Oe/Aaa on 02/04/2015 |
|---|
| Elevation: | 463 feet Estimated |
|---|
| Magnetic Variation: | 00E,(1995), [-3W (2024)] |
|---|
| Sectional: | ST LOUIS |
|---|
| From City: | 2nm E of Pinckneyville |
|---|
| Use: | Private |
|---|
| Airspace Analysis: | CONDITIONAL
Provided Approach/Departure from 110-170 & 200-070, Area is Marked W, Wind Indicator is Maintained & Comply with Far Part 91.126(B)(2). |
|---|
| Ownership: | Privately owned |
|---|
| Activation: | 10/1999 |
|---|
| Attended: | Continuous |
|---|
| Control Tower: | no |
|---|
| ARTCC: | Kansas City(ZKC)Kansas City Center |
|---|
| FSS: | Columbia FSS(COU) |
|---|
| Wind Indicator: | Lighted |
|---|
| Landing Fee: | no |
|---|
|
|
|
| Owner: | Ill Dept of Corrections
1301 Concordia Court Box 19277
Springfield, Il 62794-9277
217-558-2200 |
|---|
| Manager: | David Mitchell, Warden
5835 State Rte 154
Pinckneyville, Il 62274-3410
618-357-9722 |
|---|
|
Runway H1
| Length: | 40 feet |
|---|
| Width: | 40 feet |
|---|
| Surface: | Porland Cement Concrete |
|---|
| Surface Treatment: | NONE |
|---|
| • | Fato Measures 100 ft by 100 ft Conc. Pad Centered Within Fato. |
|---|
| • | for Cd Contact Kansas City ARTCC at 913-254-8508. |
|---|
This information is current as of the date at the top of the page. These
pages are valid for all US airports, based on information from FAA National Flight Data Center.
Weather information
is provided based on AvnWx Data Sources. NOTAM information
is from FAA's NAIMES data portal.
As with most information on this website, this page is generated based on FAA data, with
automatic translations done via computer. You can also directly read the A/FD via
the green icon link at the top of the page, which is the FAA text, and
sometimes provides a different translation of codes. Please email
me (using link at top-right of this page) if you see information which is confusing,
misleading, or wrong....Or have suggestions for additions/changes.
Comments from the user community are clearly noted as such this page, are for informational purposes only, may
be wrong and/or out-of-date, and must not be used as a sole source
for critical decision making. See Privacy Policy and
Conditions of Use.
