| 3XS6
Heliport
|
Christus Good Shepherd Medical Center
|
|
Longview, Texas
|
|
|
|
FAA NFDC Information Effective 56-day cycle 04/18/2024 - 6/13/2024
| FAA Identifier: | 3XS6 |
|---|
| Lat/Lng: | 32.5001638889, -94.7310472222
32-30-00.5900N, 094-43-51.7700W
Estimated by Faa-Est Imagery on 10/01/2015 |
|---|
| Elevation: | 359 feet Estimated |
|---|
| Magnetic Variation: | 02E,(2020), [1E (2024)] |
|---|
| Sectional: | MEMPHIS |
|---|
| From City: | in Longview |
|---|
| Use: | Private
Medical. |
|---|
| Ownership: | Privately owned |
|---|
| Activation: | 02/1998 |
|---|
| Attended: | Continuous |
|---|
| Control Tower: | no |
|---|
| ARTCC: | Fort Worth(ZFW)Fort Worth Center |
|---|
| FSS: | Fort Worth FSS(FTW) |
|---|
| Wind Indicator: | Lighted |
|---|
| Lights: | for Perimeter Lights Call 903-236-2000. |
|---|
| Landing Fee: | no |
|---|
|
|
|
| Owner: | Christus Good Shepherd Medical Center
700 E Marshall
Longview, Tx 75601
(903) 315-2000 |
|---|
| Manager: | Norman T. Hancock
President/Ceo.
700 E Marshall
Longview, Tx 75601
(903) 315-2000 |
|---|
|
Runway H1
| Length: | 40 feet |
|---|
| Width: | 40 feet |
|---|
| Surface: | Porland Cement Concrete |
|---|
| Surface Treatment: | NONE |
|---|
| Runway Lights Edge Intensity: | Perimeter |
|---|
| • | for Cd Contact Fort Worth ARTCC at 817-858-7584. |
|---|
This information is current as of the date at the top of the page. These
pages are valid for all US airports, based on information from FAA National Flight Data Center.
Weather information
is provided based on AvnWx Data Sources. NOTAM information
is from FAA's NAIMES data portal.
As with most information on this website, this page is generated based on FAA data, with
automatic translations done via computer. You can also directly read the A/FD via
the green icon link at the top of the page, which is the FAA text, and
sometimes provides a different translation of codes. Please email
me (using link at top-right of this page) if you see information which is confusing,
misleading, or wrong....Or have suggestions for additions/changes.
Comments from the user community are clearly noted as such this page, are for informational purposes only, may
be wrong and/or out-of-date, and must not be used as a sole source
for critical decision making. See Privacy Policy and
Conditions of Use.
