| 40UT
Heliport
|
Pulver
|
|
Alpine, Utah
|
|
|
|
FAA NFDC Information Effective 56-day cycle 11/27/2025 - 1/22/2026
| FAA Identifier: | 40UT (Four-Zero-Uniform-Tango) |
|---|
| Lat/Lng: | 40.4688098333, -111.753929833
40-28-07.7154N, 111-45-14.1474W
Estimated by Ado on 03/03/2025 |
|---|
| Elevation: | 5297 feet Estimated by Ado on 03/03/2025 |
|---|
| Magnetic Variation: | [10E (2025)] |
|---|
| Sectional: | SALT LAKE CITY |
|---|
| From City: | 2nm NE of Alpine |
|---|
| Use: | Private |
|---|
| Airspace Analysis: | for Design and Operation of This Facility, Refer to Asn 2024-Anm-2530-Nra and Reference FAA Advisory Circular (Ac) 150/5390-2, Heliport Design (Current Version) and the Recommendations in Flight Standards' Evaluation for This Heliport. |
|---|
| Ownership: | Privately owned |
|---|
| Activation: | 03/2025 |
|---|
| Control Tower: | no |
|---|
| ARTCC: | Salt Lake City(ZLC)Salt Lake City Center |
|---|
| FSS: | Cedar City FSS(CDC) |
|---|
| Wind Indicator: | Lighted |
|---|
| Landing Fee: | no |
|---|
|
|
|
| Owner: | Clint Pulver
3952 W. Prospector Way
Alpine, Ut 84004
385-414-2544 |
|---|
| Manager: | Clint Pulver
3952 W. Prospector Way
Alpine, Ut 84004
385-414-2544 |
|---|
|
Runway H1
| Length: | 30 feet
by Ado on 03/03/2025 |
|---|
| Width: | 60 feet |
|---|
| Surface: | Porland Cement Concrete, Fair Condition |
|---|
| Surface Treatment: | NONE |
|---|
| Remarks: | Tlof Dimensions 30 X 60. Fato Dimensions 44 X 80. Safety Area Dimensions 12 X 12. Ingress/Egress; 015/015 Degs. |
|---|
This information is current as of the date at the top of the page. These
pages are valid for all US airports, based on information from FAA National Flight Data Center.
Weather information
is provided based on AvnWx Data Sources. NOTAM information
is from FAA's NAIMES data portal.
As with most information on this website, this page is generated based on FAA data, with
automatic translations done via computer. You can also directly read the A/FD via
the green icon link at the top of the page, which is the FAA text, and
sometimes provides a different translation of codes. Please email
me (using link at top-right of this page) if you see information which is confusing,
misleading, or wrong....Or have suggestions for additions/changes.
Comments from the user community are clearly noted as such this page, are for informational purposes only, may
be wrong and/or out-of-date, and must not be used as a sole source
for critical decision making. See Privacy Policy and
Conditions of Use.
