| 5CO1
Airport
|
Spruce Point Tree Farm Llc
|
|
Austin, Colorado
|
|
|
|
FAA NFDC Information Effective 56-day cycle 03/21/2024 - 5/16/2024
| FAA Identifier: | 5CO1 (Five-Charlie-Oscar-One) |
|---|
| Lat/Lng: | 38.8333163889, -107.858951111
38-49-59.9390N, 107-51-32.2240W
Estimated |
|---|
| Elevation: | 6200 feet Estimated |
|---|
| Magnetic Variation: | 13E,(1985), [9E (2024)] |
|---|
| Sectional: | DENVER |
|---|
| From City: | 5nm NE of Austin |
|---|
| Use: | Private |
|---|
| Airspace Analysis: | CONDITIONAL
Traffic Pats to be Conducted E of Airport. |
|---|
| Ownership: | Privately owned |
|---|
| Activation: | 08/1977 |
|---|
| Attended: | Ireg Every day Daylight hours |
|---|
| Control Tower: | no |
|---|
| ARTCC: | Denver(ZDV)Denver Center |
|---|
| FSS: | Denver FSS(DEN) |
|---|
| Wind Indicator: | Unlighted |
|---|
| Landing Fee: | no |
|---|
| Single Engine GA: | 1 |
|---|
| Total: | 1 |
|---|
|
|
| Owner: | Spruce Point Tree Farm Llc
12427 Rimrock Rd
Hotchkiss, Co 81419
970-835-3255 |
|---|
| Manager: | Gary Hazelhurst
12427 Rimrock Rd
Hotchkiss, Co 81419
970-835-3255
Cell: 970-379-2241 |
|---|
|
Runway 02/20
| Length: | 3000 feet |
|---|
| Width: | 110 feet |
|---|
| Surface: | Grass / Sod |
|---|
| Surface Treatment: | NONE |
|---|
|
End 02 |
End 20 |
|---|
| Right Hand Pattern: | Yes | |
|---|
| Objects: | | Powerline |
|---|
| Object Height: | | 50' AGL |
|---|
| Object Distance: | | 100' Along centerline |
|---|
| • | for Cd Contact Denver ARTCC at 303-651-4257. |
|---|
This information is current as of the date at the top of the page. These
pages are valid for all US airports, based on information from FAA National Flight Data Center.
Weather information
is provided based on AvnWx Data Sources. NOTAM information
is from FAA's NAIMES data portal.
As with most information on this website, this page is generated based on FAA data, with
automatic translations done via computer. You can also directly read the A/FD via
the green icon link at the top of the page, which is the FAA text, and
sometimes provides a different translation of codes. Please email
me (using link at top-right of this page) if you see information which is confusing,
misleading, or wrong....Or have suggestions for additions/changes.
Comments from the user community are clearly noted as such this page, are for informational purposes only, may
be wrong and/or out-of-date, and must not be used as a sole source
for critical decision making. See Privacy Policy and
Conditions of Use.
