5MS1
Airport
Rollang Field
Rolling Fork, Mississippi

FAA NFDC Information Effective 56-day cycle 04/18/2024 - 6/13/2024

Ops Comms Services Owner Runways IFR Procs Current NOTAMs Remarks

Location

FAA Identifier:5MS1 (Five-Mike-Sierra-One)
Lat/Lng:32.9542933333, -90.8459330556
32-57-15.4560N, 090-50-45.3590W
Estimated
Elevation:106 feet Estimated
Magnetic Variation:03E,(1985), [-1W (2024)]
Sectional:MEMPHIS
From City:3nm NE of Rolling Fork

Operations

Use:Private
Airspace Analysis:NOT ANALYZED
Prior to 1959.
Ownership:Privately owned
Activation:05/1947
Control Tower:no
ARTCC:Memphis(ZME)Memphis Center
FSS:Greenwood FSS(GWO)
Wind Indicator:Unlighted
Landing Fee:no

Communications

Services

Fuel:Grade 100 Gasoline (green)
Airframe Repair:Major
Powerplant Repair:Major
Bottled Oxygen:None
Bulk Oxygen:None
Transient Storage:Hanger
5 Plane Ports.

Based Aircraft

Single Engine GA:4
Total:4

Annual Operations

Local GA (< 20 miles):6000
Non-local GA:3000
Total:9000

Ownership

Owner:Helena Plantation
Manager:Bill Rainwater
121 Kingston Rd
Birmingham, Al 35211-6980
601-873-6273

Runways

Runways:17/35

Runway 17/35

Length:3670 feet
Width:75 feet
Surface:Porland Cement Concrete, Grass / Sod
Surface Treatment:NONE
End 17 End 35
Right Hand Pattern:Yes 
Objects:PowerlineTrees
Object Clearance Slope:20:15:1
Object Distance:1500' Along centerline50' Along centerline

Procedures

NOTAMs

Additional Remarks

Runway 17/35 Center is 2000 ft by 20 ft Concrete.
for Cd Contact Memphis ARTCC at 901-368-8453/8449.

This information is current as of the date at the top of the page. These pages are valid for all US airports, based on information from FAA National Flight Data Center. Weather information is provided based on AvnWx Data Sources. NOTAM information is from FAA's NAIMES data portal.

As with most information on this website, this page is generated based on FAA data, with automatic translations done via computer. You can also directly read the A/FD via the green icon link at the top of the page, which is the FAA text, and sometimes provides a different translation of codes. Please email me (using link at top-right of this page) if you see information which is confusing, misleading, or wrong....Or have suggestions for additions/changes.

Comments from the user community are clearly noted as such this page, are for informational purposes only, may be wrong and/or out-of-date, and must not be used as a sole source for critical decision making. See Privacy Policy and Conditions of Use.