| 60CO
Heliport
|
Valley View Hospital
|
|
Glenwood Springs, Colorado
|
|
|
|
FAA NFDC Information Effective 56-day cycle 11/28/2024 - 1/23/2025
| FAA Identifier: | 60CO (Six-Zero-Charlie-Oscar) |
|---|
| Lat/Lng: | 39.5330638889, -107.322447222
39-31-59.0300N, 107-19-20.8100W
Estimated by Faa-Est Imagery on 04/03/2015 |
|---|
| Elevation: | 5855 feet Estimated by Owner on 02/24/2010 |
|---|
| Magnetic Variation: | [9E (2024)] |
|---|
| Sectional: | DENVER |
|---|
| From City: | 1nm S of Glenwood Springs |
|---|
| Use: | Private |
|---|
| Ownership: | Privately owned |
|---|
| Activation: | 03/2010 |
|---|
| Attended: | Continuous |
|---|
| Control Tower: | no |
|---|
| ARTCC: | Denver(ZDV)Denver Center |
|---|
| FSS: | Denver FSS(DEN) |
|---|
| Wind Indicator: | Lighted |
|---|
| Lights: | Sunset-Sunrise |
|---|
| Landing Fee: | no |
|---|
|
|
|
| Owner: | Valley View Hospital Association
1906 Blake Ave
Glenwood Springs, Co 81601
970-384-6600 |
|---|
| Manager: | Josh Anderson
Additional Contact: Rob Smith, 970-384-6967, ROBERT.SMITH@VVH.ORG
1906 Blake Ave
Glenwood Springs, Co 81601
970-987-0504 |
|---|
|
Runway H1
| Length: | 45 feet
by Owner on 02/24/2010 |
|---|
| Width: | 45 feet |
|---|
| Surface: | Pierced Steel Planking / Landing Mats / Membranes, Good Condition |
|---|
| Surface Treatment: | NONE |
|---|
| Runway Lights Edge Intensity: | Perimeter |
|---|
| • | for Cd Contact Aspen Approach at 970-925-6898, When Approach Closed Contact Denver ARTCC at 303-651-4257. |
|---|
This information is current as of the date at the top of the page. These
pages are valid for all US airports, based on information from FAA National Flight Data Center.
Weather information
is provided based on AvnWx Data Sources. NOTAM information
is from FAA's NAIMES data portal.
As with most information on this website, this page is generated based on FAA data, with
automatic translations done via computer. You can also directly read the A/FD via
the green icon link at the top of the page, which is the FAA text, and
sometimes provides a different translation of codes. Please email
me (using link at top-right of this page) if you see information which is confusing,
misleading, or wrong....Or have suggestions for additions/changes.
Comments from the user community are clearly noted as such this page, are for informational purposes only, may
be wrong and/or out-of-date, and must not be used as a sole source
for critical decision making. See Privacy Policy and
Conditions of Use.
