62AK
Seaplane Base
Wallis Lake
Wasilla, Alaska

FAA NFDC Information Effective 56-day cycle 11/28/2024 - 1/23/2025

Ops Comms Services Owner Runways IFR Procs Current NOTAMs Remarks

Location

FAA Identifier:62AK
Lat/Lng:61.5728611111, -149.5747
61-34-22.3000N, 149-34-28.9200W
Estimated by Owner on 11/16/1999
Elevation:320 feet Estimated by Owner on 11/16/1999
Magnetic Variation:22E,(2000), [14E (2024)]
Sectional:ANCHORAGE
From City:5nm E of Wasilla

Operations

Use:Private
Ownership:Privately owned
Activation:07/2002
Control Tower:no
ARTCC:Anchorage(ZAN)Anchorage Center
FSS:Kenai FSS(ENA)
Wind Indicator:Lighted
Landing Fee:no

Communications

CTAF:122.800

Services

Based Aircraft

Total:0

Annual Operations

Total:0

Ownership

Owner:Ernest Belanger
P.O. Box 298098
Wasilla, Ak 99629
907-376-2205
Manager:Ernest Belanger
P.O. Box 298098
Wasilla, Ak 99629
907-376-2205

Runways

Runways:09W/27W

Runway 09W/27W

Length:2000 feet
Width:800 feet
Surface:Water
Surface Treatment:NONE
End 09W End 27W
Right Hand Pattern: Yes

Procedures

NOTAMs

Additional Remarks

20 to 40 ft Trees Surround Lake.

This information is current as of the date at the top of the page. These pages are valid for all US airports, based on information from FAA National Flight Data Center. Weather information is provided based on AvnWx Data Sources. NOTAM information is from FAA's NAIMES data portal.

As with most information on this website, this page is generated based on FAA data, with automatic translations done via computer. You can also directly read the A/FD via the green icon link at the top of the page, which is the FAA text, and sometimes provides a different translation of codes. Please email me (using link at top-right of this page) if you see information which is confusing, misleading, or wrong....Or have suggestions for additions/changes.

Comments from the user community are clearly noted as such this page, are for informational purposes only, may be wrong and/or out-of-date, and must not be used as a sole source for critical decision making. See Privacy Policy and Conditions of Use.