6XS7
Airport
|
Eugene's Dream
|
Springtown, Texas
|
|
|
|
FAA NFDC Information Effective 56-day cycle 03/21/2024 - 5/16/2024
FAA Identifier: | 6XS7 |
---|
Lat/Lng: | 33.0452777778, -97.6748055556 33-02-43.0000N, 097-40-29.3000W Estimated |
---|
Elevation: | 905 feet Estimated |
---|
Magnetic Variation: | 06E,(1995), [3E (2024)] |
---|
Sectional: | DALLAS-FT WORTH |
---|
From City: | 4nm N of Springtown |
---|
Use: | Private |
---|
Ownership: | Privately owned |
---|
Activation: | 02/1998 |
---|
Control Tower: | no |
---|
ARTCC: | Fort Worth(ZFW)Fort Worth Center |
---|
FSS: | Fort Worth FSS(FTW) |
---|
Wind Indicator: | Unlighted |
---|
Landing Fee: | no |
---|
Single Engine GA: | 3 |
---|
Total: | 3 |
---|
|
|
Owner: | Herschel W. Crump 350 Cr 3597 Boyd, Tx 76023 817-658-3070 |
---|
Manager: | Herschel W. Crump 350 Cr 3597 Boyd, Tx 76023 817-658-3070 |
---|
|
Runway 10/28
Length: | 1900 feet |
---|
Width: | 40 feet |
---|
Surface: | Grass / Sod |
---|
Surface Treatment: | NONE |
---|
|
End 10 |
End 28 |
---|
Objects affecting Navigable Airspace (CFR part 77): | Utility runway with a visual approach | Utility runway with a visual approach |
---|
Runway 17/35
Length: | 3200 feet by Owner on 09/11/2002 |
---|
Width: | 100 feet |
---|
Surface: | Grass / Sod |
---|
Surface Treatment: | NONE |
---|
|
End 17 |
End 35 |
---|
Objects affecting Navigable Airspace (CFR part 77): | Utility runway with a visual approach | Utility runway with a visual approach |
---|
• | 306 ft Tower 1.25 NM SSE of Airport. |
---|
This information is current as of the date at the top of the page. These
pages are valid for all US airports, based on information from FAA National Flight Data Center.
Weather information
is provided based on AvnWx Data Sources. NOTAM information
is from FAA's NAIMES data portal.
As with most information on this website, this page is generated based on FAA data, with
automatic translations done via computer. You can also directly read the A/FD via
the green icon link at the top of the page, which is the FAA text, and
sometimes provides a different translation of codes. Please email
me (using link at top-right of this page) if you see information which is confusing,
misleading, or wrong....Or have suggestions for additions/changes.
Comments from the user community are clearly noted as such this page, are for informational purposes only, may
be wrong and/or out-of-date, and must not be used as a sole source
for critical decision making. See Privacy Policy and
Conditions of Use.