7MD2
Heliport
|
Nat'L Emergency Training Cntr
|
Emmitsburg, Maryland
|
|
|
|
FAA NFDC Information Effective 56-day cycle 09/05/2024 - 10/31/2024
FAA Identifier: | 7MD2 |
---|
Lat/Lng: | 39.685, -77.3183333333 39-41-06.0000N, 077-19-06.0000W Estimated |
---|
Elevation: | 416 feet Estimated |
---|
Magnetic Variation: | 10W,(1995), [-11W (2024)] |
---|
Sectional: | WASHINGTON |
---|
From City: | 1nm S of Emmitsburg |
---|
Use: | Private |
---|
Airspace Analysis: | CONDITIONAL VFR only; Maintain Clear 8:1 Approach; Appropriate Markings for Ingress/Egress;Minimize Noise. |
---|
Ownership: | Publicly owned |
---|
Activation: | 02/1998 |
---|
Attended: | Continuous |
---|
Control Tower: | no |
---|
ARTCC: | Washington(ZDC)New York Center(ZNY) |
---|
FSS: | Leesburg FSS(DCA) |
---|
Wind Indicator: | Lighted |
---|
Lights: | Req Perimeter Lights - 126.2, or Call 301-447-1111. |
---|
Landing Fee: | no |
---|
|
|
Owner: | Fed Emergency Management Agency 16825 S Seton Ave Emmitsburg, Md 21727 301-447-1000 |
---|
Manager: | James Fuentes 16825 S Seton Ave Emmitsburg, Md 21727 (301) 447-1573 |
---|
|
Runway H1
Length: | 60 feet |
---|
Width: | 60 feet |
---|
Surface: | Porland Cement Concrete, Good Condition |
---|
Surface Treatment: | NONE |
---|
Runway Lights Edge Intensity: | Perimeter |
---|
• | for Cd Contact Washington ARTCC at 703-771-3587. |
---|
This information is current as of the date at the top of the page. These
pages are valid for all US airports, based on information from FAA National Flight Data Center.
Weather information
is provided based on AvnWx Data Sources. NOTAM information
is from FAA's NAIMES data portal.
As with most information on this website, this page is generated based on FAA data, with
automatic translations done via computer. You can also directly read the A/FD via
the green icon link at the top of the page, which is the FAA text, and
sometimes provides a different translation of codes. Please email
me (using link at top-right of this page) if you see information which is confusing,
misleading, or wrong....Or have suggestions for additions/changes.
Comments from the user community are clearly noted as such this page, are for informational purposes only, may
be wrong and/or out-of-date, and must not be used as a sole source
for critical decision making. See Privacy Policy and
Conditions of Use.