81TS
Airport
|
Rancho Deluxe
|
Edna Hill, Texas
|
|
|
|
FAA NFDC Information Effective 56-day cycle 04/18/2024 - 6/13/2024
FAA Identifier: | 81TS (Eight-One-Tango-Sierra) |
---|
Lat/Lng: | 31.9364083333, -98.3456027778 31-56-11.0700N, 098-20-44.1700W Estimated by Owner on 05/17/2017 |
---|
Elevation: | 1401 feet Estimated by Faa Oe/Aaa on 05/25/2017 |
---|
Magnetic Variation: | [3E (2024)] |
---|
Sectional: | HOUSTON |
---|
From City: | 1nm SW of Edna Hill |
---|
Use: | Private |
---|
Ownership: | Privately owned |
---|
Activation: | 05/2017 |
---|
Control Tower: | no |
---|
ARTCC: | Fort Worth(ZFW)Fort Worth Center |
---|
FSS: | Montgomery County FSS(CXO) |
---|
Wind Indicator: | Unlighted |
---|
Landing Fee: | no |
---|
Single Engine GA: | 1 |
---|
Total: | 1 |
---|
|
|
Owner: | Robert G Mullins 5751 County Road 328 Dublin, Tx 76446 210-240-4451 RMULLINS@ROMCO.COM |
---|
Manager: | Robert G Mullins 5751 County Road 328 Dublin, Tx 76446 210-240-4451 RMULLINS@ROMCO.COM |
---|
|
Runway 18/36
Length: | 1800 feet by Owner on 05/17/2017 |
---|
Width: | 50 feet |
---|
Surface: | Grass / Sod |
---|
Surface Treatment: | NONE |
---|
|
End 18 |
End 36 |
---|
Elevation at End: | 1401.0' MSL | 1373.0' MSL |
---|
Elevation at Touchdown Zone: | 1401.0' MSL | 1401.0' MSL |
---|
Objects affecting Navigable Airspace (CFR part 77): | Utility runway with a visual approach | Utility runway with a visual approach |
---|
• | for Cd Contact Fort Worth ARTCC at 817-858-7584. |
---|
This information is current as of the date at the top of the page. These
pages are valid for all US airports, based on information from FAA National Flight Data Center.
Weather information
is provided based on AvnWx Data Sources. NOTAM information
is from FAA's NAIMES data portal.
As with most information on this website, this page is generated based on FAA data, with
automatic translations done via computer. You can also directly read the A/FD via
the green icon link at the top of the page, which is the FAA text, and
sometimes provides a different translation of codes. Please email
me (using link at top-right of this page) if you see information which is confusing,
misleading, or wrong....Or have suggestions for additions/changes.
Comments from the user community are clearly noted as such this page, are for informational purposes only, may
be wrong and/or out-of-date, and must not be used as a sole source
for critical decision making. See Privacy Policy and
Conditions of Use.