8AK5
Airport
Fort Crosby Airport
Trapper Creek, Alaska

FAA NFDC Information Effective 56-day cycle 01/04/2018 - 3/1/2018

Ops Comms Services Owner Runways IFR Procs Current NOTAMs Remarks

Location

FAA Identifier:8AK5
Lat/Lng:62.5138888889, -150.265277778
62-30-50.0000N, 150-15-55.0000W
Estimated by OWNER on 01/13/2016
Elevation:650 feetEstimatedby OWNERon 01/13/2016
Magnetic Variation:[16E (2017)]
Sectional:ANCHORAGE
From City:12nmN of Trapper Creek

Operations

Use:Private
Ownership:Privately owned
Activation:12/2016
Control Tower:no
ARTCC:Anchorage Center(ZAN)
FSS:Kenai FSS(ENA)
Wind Indicator:Lighted
Landing Fee:no

Communications

Services

Based Aircraft

Single Engine GA:3
Ultralights:1
Total:4

Annual Operations

Total:0

Ownership

Owner:Kenneth Crosby
Po Box 13355
Trapper Creek, Ak 99683
907-733-1566
Manager:Kenneth Crosby
Po Box 13355
Trapper Creek, Ak 99683
907-733-1566

Runways

Runways:18/36

Runway 18/36

Length:1800 feet
by Owner on 01/13/2016
Width:50 feet
Surface:Gravel
End 18 End 36

Procedures

NOTAMs

Additional Remarks

Runways are Gravel with Natural Grasses Cut Short.
No Lights or Markings on the Runway. a Wind Sock may be Present.
50 Ft Trees at the North End and 600 Ft of Level Swamp Followed by 50 Ft Trees at the South End.
Preferred Landing to the North and Take Off to the South Due to Private Property/Subdivision to the North.
Emergency Landings by Unauthorised Aircraft Allowed.
No Public Access (Other than Emergency Landing) to Airstrip Without Owners Prior Approval

This information is current as of the date at the top of the page. These pages are valid for all US airports, based on information from FAA National Flight Data Center. Weather information is provided based on AvnWx Data Sources. NOTAM information is from FAA's NAIMES data portal.

As with most information on this website, this page is generated based on FAA data, with automatic translations done via computer. You can also directly read the A/FD via the green icon link at the top of the page, which is the FAA text, and sometimes provides a different translation of codes. Please email me (using link at top-right of this page) if you see information which is confusing, misleading, or wrong....Or have suggestions for additions/changes.

Comments from the user community are clearly noted as such this page, are for informational purposes only, may be wrong and/or out-of-date, and must not be used as a sole source for critical decision making. See Privacy Policy and Conditions of Use.