96AK
Seaplane Base
Hackney Landing
Clam Gulch, Alaska

FAA NFDC Information Effective 56-day cycle 11/28/2024 - 1/23/2025

Ops Comms Services Owner Runways IFR Procs Current NOTAMs Remarks

Location

FAA Identifier:96AK
Lat/Lng:60.2871513056, -151.347571278
60-17-13.7447N, 151-20-51.2566W
Estimated by Ado on 07/30/2024
Elevation:0 feet Estimated by Ado on 07/30/2024
Magnetic Variation: [13E (2024)]
Sectional:SEWARD
From City:4nm N of Clam Gulch

Operations

Use:Private
Ownership:Privately owned
Activation:04/2006
Control Tower:no
ARTCC:Anchorage(ZAN)Anchorage Center
FSS:Kenai FSS(ENA)
Wind Indicator:Lighted
Landing Fee:no

Communications

CTAF:122.500

Services

Based Aircraft

Total:0

Annual Operations

Total:0

Ownership

Owner:Dnr
550 W 7Th Ave., Suite 1260
Anchorage, Ak 99524
907-269-8400
Manager:Mike Hackney
21172 Carol Rd.
Clam Gulch, Ak 99568
907-262-2364

Runways

Runways:18W/36W

Runway 18W/36W

Length:2000 feet
by Ado on 07/30/2024
Width:150 feet
Surface:Water
Surface Treatment:NONE
End 18W End 36W
Elevation at End:0.0' MSL0.0' MSL

Procedures

NOTAMs

Additional Remarks


This information is current as of the date at the top of the page. These pages are valid for all US airports, based on information from FAA National Flight Data Center. Weather information is provided based on AvnWx Data Sources. NOTAM information is from FAA's NAIMES data portal.

As with most information on this website, this page is generated based on FAA data, with automatic translations done via computer. You can also directly read the A/FD via the green icon link at the top of the page, which is the FAA text, and sometimes provides a different translation of codes. Please email me (using link at top-right of this page) if you see information which is confusing, misleading, or wrong....Or have suggestions for additions/changes.

Comments from the user community are clearly noted as such this page, are for informational purposes only, may be wrong and/or out-of-date, and must not be used as a sole source for critical decision making. See Privacy Policy and Conditions of Use.