96XA
Airport
Gnaws Farm
Pecos, Texas

FAA NFDC Information Effective 56-day cycle 03/21/2024 - 5/16/2024

Ops Comms Services Owner Runways IFR Procs Current NOTAMs Remarks

Location

FAA Identifier:96XA
Lat/Lng:31.2844444444, -103.643888889
31-17-04.0000N, 103-38-38.0000W
Estimated by Owner on 08/11/2012
Elevation:2717 feet Estimated by Owner on 08/11/2012
Magnetic Variation: [6E (2024)]
Sectional:EL PASO
From City:11nm SSW of Pecos

Operations

Use:Private
Airspace Analysis:CONDITIONAL
Provided VFR Operations and Pvt Use only.
Ownership:Privately owned
Activation:02/2013
Control Tower:no
ARTCC:Albuquerque(ZAB)Albuquerque Center
FSS:San Angelo FSS(SJT)
Wind Indicator:Unlighted
Landing Fee:no

Communications

Services

Based Aircraft

Total:0

Annual Operations

Total:0

Ownership

Owner:Walt Stout/ George Neuschaefer
20496 N Mooney Drive
White Hills, Az 86445
702-202-9851
Manager:Walt Stout
20496 N Mooney Drive
White Hills, Az 86445
702-202-9851

Runways

Runways:13/31

Runway 13/31

Length:6800 feet
by Owner on 08/11/2012
Width:50 feet
Surface:Natural Soil
Surface Treatment:NONE
End 13 End 31
Displaced Threshold Distance: 700'
Runway End 31 Displaced Threshold Marked with Orange Cones, Powerline South and East.
Objects: Powerline
Objects affecting Navigable Airspace (CFR part 77):Utility runway with a visual approachUtility runway with a visual approach
Object Height: 50' AGL
Object Distance: 300' Along centerline

Procedures

NOTAMs

Additional Remarks

for Cd Contact Albuquerque ARTCC at 505-856-4861.

This information is current as of the date at the top of the page. These pages are valid for all US airports, based on information from FAA National Flight Data Center. Weather information is provided based on AvnWx Data Sources. NOTAM information is from FAA's NAIMES data portal.

As with most information on this website, this page is generated based on FAA data, with automatic translations done via computer. You can also directly read the A/FD via the green icon link at the top of the page, which is the FAA text, and sometimes provides a different translation of codes. Please email me (using link at top-right of this page) if you see information which is confusing, misleading, or wrong....Or have suggestions for additions/changes.

Comments from the user community are clearly noted as such this page, are for informational purposes only, may be wrong and/or out-of-date, and must not be used as a sole source for critical decision making. See Privacy Policy and Conditions of Use.