AR06
Airport
Cantrell Farms
Conway, Arkansas

FAA NFDC Information Effective 56-day cycle 07/18/2019 - 9/12/2019

Ops Comms Services Owner Runways IFR Procs Current NOTAMs Remarks

Location

FAA Identifier:AR06 (Alpha-Romeo-Zero-Six)
Lat/Lng:35.2325, -92.3433333333
35-13-57.0000N, 092-20-36.0000W
Estimated
Elevation:325 feet Estimated
Magnetic Variation:03E,(1995), [0W (2019)]
Sectional:MEMPHIS
From City:3nm E of Conway

Operations

Use:Private
Ownership:Privately owned
Activation:01/1999
Control Tower:no
ARTCC:Memphis(ZME)Memphis Center(ZME)
FSS:Jonesboro FSS(JBR)
Wind Indicator:Lighted
Landing Fee:no

Communications

Services

Based Aircraft

Single Engine GA:2
Total:2

Annual Operations

Total:0

Ownership

Owner:William R Otto, Sr
62 Lakeview Drive
Conway, Ar 72032
(501) 450-6296
Manager:Bryant Otto
62 Lakeview Drive
Conway, Ar 72032
(501) 450-6296

Runways

Runways:10/28

Runway 10/28

Length:2640 feet
Width:50 feet
Surface:Grass / Sod
End 10 End 28
Objects:TreesTrees
Objects affecting Navigable Airspace (CFR part 77):Utility runway with a visual approachUtility runway with a visual approach
Object Height:100' AGL100' AGL
Object Distance:1320' Along centerline600' Along centerline

Procedures

NOTAMs

Additional Remarks

Other Contact: Bryant Otto - P O Box 598 Conway, Ar. 72033 501-450-6296
for Cd Contact Memphis ARTCC at 901-368-8453.

This information is current as of the date at the top of the page. These pages are valid for all US airports, based on information from FAA National Flight Data Center. Weather information is provided based on AvnWx Data Sources. NOTAM information is from FAA's NAIMES data portal.

As with most information on this website, this page is generated based on FAA data, with automatic translations done via computer. You can also directly read the A/FD via the green icon link at the top of the page, which is the FAA text, and sometimes provides a different translation of codes. Please email me (using link at top-right of this page) if you see information which is confusing, misleading, or wrong....Or have suggestions for additions/changes.

Comments from the user community are clearly noted as such this page, are for informational purposes only, may be wrong and/or out-of-date, and must not be used as a sole source for critical decision making. See Privacy Policy and Conditions of Use.