ID53
Heliport
|
Minidoka Meml Hospital
|
Rupert, Idaho
|
|
|
|
FAA NFDC Information Effective 56-day cycle 04/17/2025 - 6/12/2025
FAA Identifier: | ID53 (India-Delta-Five-Three) |
---|
Lat/Lng: | 42.6212972222, -113.685791667 42-37-16.6700N, 113-41-08.8500W Estimated by Faa-Est Imagery on 06/03/2016 |
---|
Elevation: | 4156 feet Estimated |
---|
Magnetic Variation: | 16E,(1985), [12E (2025)] |
---|
Sectional: | SALT LAKE CITY |
---|
From City: | 1nm W of Rupert |
---|
Use: | Private Medical Use. |
---|
Airspace Analysis: | CONDITIONAL Ingress/Egress Routes Avoid Nearby Housing; Operator Contact FSS for Clearance When Weather Below Basic VFR Minima; Owner Obtain Briefing from FSS; Powerlines be Marked & Lighted. |
---|
Ownership: | Publicly owned |
---|
Activation: | 03/1986 |
---|
Attended: | Continuous |
---|
Control Tower: | no |
---|
ARTCC: | Salt Lake City(ZLC)Salt Lake City Center |
---|
FSS: | Boise FSS(BOI) |
---|
Wind Indicator: | Lighted |
---|
Lights: | Sunset-Sunrise |
---|
Landing Fee: | no |
---|
|
|
Owner: | Minidoka County Hospital 1224 8Th Street Rupert, Id 83350 208-436-0481 |
---|
Manager: | Mark Phillips 1224 8Th St. Rupert, Id 83350 208-436-0481 |
---|
|
Runway H1
Length: | 22 feet |
---|
Width: | 26 feet |
---|
Surface: | Porland Cement Concrete, Good Condition |
---|
Surface Treatment: | NONE |
---|
Runway Lights Edge Intensity: | Perimeter |
---|
• | for Cd Contact Twin Falls Approach at 208-734-7160, When Approach Closed Contact Salt Lake ARTCC at 801-320-2568. |
---|
This information is current as of the date at the top of the page. These
pages are valid for all US airports, based on information from FAA National Flight Data Center.
Weather information
is provided based on AvnWx Data Sources. NOTAM information
is from FAA's NAIMES data portal.
As with most information on this website, this page is generated based on FAA data, with
automatic translations done via computer. You can also directly read the A/FD via
the green icon link at the top of the page, which is the FAA text, and
sometimes provides a different translation of codes. Please email
me (using link at top-right of this page) if you see information which is confusing,
misleading, or wrong....Or have suggestions for additions/changes.
Comments from the user community are clearly noted as such this page, are for informational purposes only, may
be wrong and/or out-of-date, and must not be used as a sole source
for critical decision making. See Privacy Policy and
Conditions of Use.