MT38
Airport
 Swank
Poplar, Montana

FAA NFDC Information Effective 56-day cycle 03/21/2024 - 5/16/2024

Ops Comms Services Owner Runways IFR Procs Current NOTAMs Remarks

Location

FAA Identifier:MT38
Lat/Lng:48.4033547222, -105.156647222
48-24-12.0770N, 105-09-23.9300W
Estimated
Elevation:2205 feet Estimated
Magnetic Variation:13E,(1985), [8E (2024)]
Sectional:BILLINGS
From City:17nm N of Poplar

Operations

Use:Private
Airspace Analysis:NOT ANALYZED
Filed for Record Purposes only.
Ownership:Privately owned
Activation:02/1982
Control Tower:no
ARTCC:Salt Lake City(ZLC)Salt Lake City Center
FSS:Great Falls FSS(GTF)
Wind Indicator:Unlighted
Landing Fee:no

Communications

Services

Based Aircraft

Single Engine GA:1
Total:1

Annual Operations

Total:0

Ownership

Owner:Mark Swank
Po Box 486
Poplar, Mt 59255
406-448-2281
Manager:Mark Swank
Po Box 486
Poplar, Mt 59255
406-448-2281

Runways

Runways:08/26

Runway 08/26

Length:2000 feet
Width:50 feet
Surface:Grass / Sod
Surface Treatment:NONE
End 08 End 26

Procedures

NOTAMs

Additional Remarks

•for Cd Contact Salt Lake ARTCC at 801-320-2568.

This information is current as of the date at the top of the page. These pages are valid for all US airports, based on information from FAA National Flight Data Center. Weather information is provided based on AvnWx Data Sources. NOTAM information is from FAA's NAIMES data portal.

As with most information on this website, this page is generated based on FAA data, with automatic translations done via computer. You can also directly read the A/FD via the green icon link at the top of the page, which is the FAA text, and sometimes provides a different translation of codes. Please email me (using link at top-right of this page) if you see information which is confusing, misleading, or wrong....Or have suggestions for additions/changes.

Comments from the user community are clearly noted as such this page, are for informational purposes only, may be wrong and/or out-of-date, and must not be used as a sole source for critical decision making. See Privacy Policy and Conditions of Use.