| NC96
Heliport
|
Betsy Johnson Meml Hospital
|
|
Dunn, North Carolina
|
|
|
|
FAA NFDC Information Effective 56-day cycle 11/27/2025 - 1/22/2026
| FAA Identifier: | NC96 |
|---|
| Lat/Lng: | 35.3074911389, -78.6361730833
35-18-26.9681N, 078-38-10.2231W
Estimated by Ado on 05/13/2025 |
|---|
| Elevation: | 196 feet Estimated by Ado on 05/13/2025 |
|---|
| Magnetic Variation: | 07W,(1985), [-10W (2025)] |
|---|
| Sectional: | CHARLOTTE |
|---|
| From City: | in Dunn |
|---|
| Use: | Private |
|---|
| Airspace Analysis: | CONDITIONAL
VFR Pvt Use; Coord Use of Heli with Raleigh Gado. |
|---|
| Ownership: | Privately owned |
|---|
| Activation: | 09/1980 |
|---|
| Attended: | Continuous |
|---|
| Control Tower: | no |
|---|
| ARTCC: | Washington(ZDC)Washington Center |
|---|
| FSS: | Raleigh FSS(RDU) |
|---|
| Wind Indicator: | Unlighted |
|---|
| Landing Fee: | no |
|---|
|
|
|
| Owner: | Betsy Johnson Memorial Hosp
800 Tilghman Drive
Dunn, Nc 28334-5510
(910) 892-1000 |
|---|
| Manager: | Toby Pope
800 Tilghman Drive
Dunn, Nc 28334-5510
(910) 892-1000
Ext 4200 |
|---|
|
Runway H1
| Length: | 42 feet
by Ado on 05/13/2025 |
|---|
| Width: | 42 feet |
|---|
| Surface: | Porland Cement Concrete, Good Condition |
|---|
| Surface Treatment: | NONE |
|---|
| Runway Lights Edge Intensity: | Perimeter |
|---|
| Remarks: | Tlof 42 X 42; Fato 70 X 70; Safety Area 93 X 93. Pri Ingress 210; Pri Egress 030. |
|---|
| • | for Cd Contact Washington ARTCC at 703-771-3587. |
|---|
This information is current as of the date at the top of the page. These
pages are valid for all US airports, based on information from FAA National Flight Data Center.
Weather information
is provided based on AvnWx Data Sources. NOTAM information
is from FAA's NAIMES data portal.
As with most information on this website, this page is generated based on FAA data, with
automatic translations done via computer. You can also directly read the A/FD via
the green icon link at the top of the page, which is the FAA text, and
sometimes provides a different translation of codes. Please email
me (using link at top-right of this page) if you see information which is confusing,
misleading, or wrong....Or have suggestions for additions/changes.
Comments from the user community are clearly noted as such this page, are for informational purposes only, may
be wrong and/or out-of-date, and must not be used as a sole source
for critical decision making. See Privacy Policy and
Conditions of Use.
