NJ44
Heliport
|
Liberty Hall
|
Elizabeth, New Jersey
|
|
|
|
FAA NFDC Information Effective 56-day cycle 12/26/2024 - 2/20/2025
FAA Identifier: | NJ44 |
---|
Lat/Lng: | 40.6751022222, -74.2454236111 40-40-30.3680N, 074-14-43.5250W Estimated |
---|
Elevation: | 43 feet Estimated |
---|
Magnetic Variation: | 12W,(1985), [-13W (2024)] |
---|
Sectional: | NEW YORK |
---|
From City: | 1nm NW of Elizabeth |
---|
Use: | Private |
---|
Ownership: | Privately owned |
---|
Activation: | 06/1964 |
---|
Control Tower: | no |
---|
ARTCC: | New York(ZNY)New York Center |
---|
FSS: | Millville FSS(MIV) |
---|
Wind Indicator: | Unlighted |
---|
Landing Fee: | no |
---|
Airframe Repair: | None |
---|
Powerplant Repair: | None |
---|
|
|
Owner: | Liberty Hall Foundation 1003 Morris Avenue Union, Nj 07083 908-527-0400 |
---|
Manager: | Rachael Goldberg 1003 Morris Avenue Union, Nj 07083-0760 908-527-0400 |
---|
|
Runway H1
Length: | 200 feet |
---|
Width: | 200 feet |
---|
Surface: | Grass / Sod, Fair Condition |
---|
Surface Treatment: | NONE |
---|
• | for Cd Contact New York Approach at 800-645-3206. |
---|
This information is current as of the date at the top of the page. These
pages are valid for all US airports, based on information from FAA National Flight Data Center.
Weather information
is provided based on AvnWx Data Sources. NOTAM information
is from FAA's NAIMES data portal.
As with most information on this website, this page is generated based on FAA data, with
automatic translations done via computer. You can also directly read the A/FD via
the green icon link at the top of the page, which is the FAA text, and
sometimes provides a different translation of codes. Please email
me (using link at top-right of this page) if you see information which is confusing,
misleading, or wrong....Or have suggestions for additions/changes.
Comments from the user community are clearly noted as such this page, are for informational purposes only, may
be wrong and/or out-of-date, and must not be used as a sole source
for critical decision making. See Privacy Policy and
Conditions of Use.