SD74
Airport
|
Vander Wal
|
Pollock, South Dakota
|
|
|
|
FAA NFDC Information Effective 56-day cycle 04/18/2024 - 6/13/2024
FAA Identifier: | SD74 |
---|
Lat/Lng: | 45.9955497222, -100.376235278 45-59-43.9790N, 100-22-34.4470W Estimated |
---|
Elevation: | 1955 feet Estimated |
---|
Magnetic Variation: | 10E,(1985), [5E (2024)] |
---|
Sectional: | TWIN CITIES |
---|
From City: | 8nm NW of Pollock |
---|
Use: | Private |
---|
Airspace Analysis: | NOT ANALYZED Filed for Record Purposes only. |
---|
Ownership: | Privately owned |
---|
Activation: | 07/1989 |
---|
Control Tower: | no |
---|
ARTCC: | Minneapolis(ZMP)Minneapolis Center |
---|
FSS: | Huron FSS(HON) |
---|
Wind Indicator: | Unlighted |
---|
Landing Fee: | no |
---|
Fuel: | Grade 100LL Gasoline (low lead blue) |
---|
Single Engine GA: | 2 |
---|
Total: | 2 |
---|
|
|
Owner: | Willis Vander Wal 9862 Main Ave SE Pollock, Sd 57648 |
---|
Manager: | Carter Vander Wal 165 97Th Street SW Pollock, Sd 57648 701-336-7722 |
---|
|
Runway 15/33
Length: | 2600 feet |
---|
Width: | 50 feet |
---|
Surface: | Grass / Sod, Poor Condition |
---|
Surface Treatment: | NONE |
---|
|
End 15 |
End 33 |
---|
Objects affecting Navigable Airspace (CFR part 77): | Utility runway with a visual approach | Utility runway with a visual approach |
---|
• | for Cd Contact Minneapolis ARTCC at 651-463-5588. |
---|
This information is current as of the date at the top of the page. These
pages are valid for all US airports, based on information from FAA National Flight Data Center.
Weather information
is provided based on AvnWx Data Sources. NOTAM information
is from FAA's NAIMES data portal.
As with most information on this website, this page is generated based on FAA data, with
automatic translations done via computer. You can also directly read the A/FD via
the green icon link at the top of the page, which is the FAA text, and
sometimes provides a different translation of codes. Please email
me (using link at top-right of this page) if you see information which is confusing,
misleading, or wrong....Or have suggestions for additions/changes.
Comments from the user community are clearly noted as such this page, are for informational purposes only, may
be wrong and/or out-of-date, and must not be used as a sole source
for critical decision making. See Privacy Policy and
Conditions of Use.