| TS20
Airport
|
Joseph Of Cupertino Stolport
|
|
Muenster, Texas
|
|
|
|
FAA NFDC Information Effective 56-day cycle 04/18/2024 - 6/13/2024
| FAA Identifier: | TS20 (Tango-Sierra-Two-Zero) |
|---|
| Lat/Lng: | 33.6506972222, -97.4321194444
33-39-02.5100N, 097-25-55.6300W
Estimated by Owner on 09/30/2020 |
|---|
| Elevation: | 1093 feet Estimated by Owner on 09/30/2020 |
|---|
| Magnetic Variation: | [3E (2024)] |
|---|
| Sectional: | DALLAS-FT WORTH |
|---|
| From City: | 3nm W of Muenster |
|---|
| Use: | Private |
|---|
| Ownership: | Privately owned |
|---|
| Activation: | 10/2020 |
|---|
| Control Tower: | no |
|---|
| ARTCC: | Fort Worth(ZFW)Fort Worth Center |
|---|
| FSS: | Fort Worth FSS(FTW) |
|---|
| Wind Indicator: | Unlighted |
|---|
| Landing Fee: | no |
|---|
| Single Engine GA: | 3 |
|---|
| Total: | 3 |
|---|
|
|
| Owner: | Andrew Rozell
2595 County Road 300
Muenster, Tx 76252
214-649-3324 |
|---|
| Manager: | Andrew Rozell
2595 County Road 300
Muenster, Tx 76252
214-649-3324 |
|---|
|
Runway 18/36
| Length: | 1525 feet
by Owner on 09/30/2020 |
|---|
| Width: | 40 feet |
|---|
| Surface: | Grass / Sod |
|---|
| Surface Treatment: | NONE |
|---|
|
End 18 |
End 36 |
|---|
| Elevation at End: | 1092.0' MSL | 1093.0' MSL |
|---|
| • | Runway 18 & 36 Thrs Marked with Red Reflective Mkrs. |
|---|
| • | Runway 18/36 Edges Marked with White Reflective Mkrs at 300 ft Increments. |
|---|
This information is current as of the date at the top of the page. These
pages are valid for all US airports, based on information from FAA National Flight Data Center.
Weather information
is provided based on AvnWx Data Sources. NOTAM information
is from FAA's NAIMES data portal.
As with most information on this website, this page is generated based on FAA data, with
automatic translations done via computer. You can also directly read the A/FD via
the green icon link at the top of the page, which is the FAA text, and
sometimes provides a different translation of codes. Please email
me (using link at top-right of this page) if you see information which is confusing,
misleading, or wrong....Or have suggestions for additions/changes.
Comments from the user community are clearly noted as such this page, are for informational purposes only, may
be wrong and/or out-of-date, and must not be used as a sole source
for critical decision making. See Privacy Policy and
Conditions of Use.
