| TT29
Airport
|
Davidson Farms
|
|
Roxton, Texas
|
|
|
|
FAA NFDC Information Effective 56-day cycle 04/18/2024 - 6/13/2024
| FAA Identifier: | TT29 |
|---|
| Lat/Lng: | 33.5341524722, -95.6949278333
33-32-02.9489N, 095-41-41.7402W
Estimated by Owner on 01/23/2024 |
|---|
| Elevation: | 513 feet Estimated by Owner on 01/23/2024 |
|---|
| Magnetic Variation: | [2E (2024)] |
|---|
| Sectional: | DALLAS-FT WORTH |
|---|
| From City: | 2nm SE of Roxton |
|---|
| Use: | Private |
|---|
| Airspace Analysis: | CONDITIONAL |
|---|
| Ownership: | Privately owned |
|---|
| Activation: | 01/2024 |
|---|
| Control Tower: | no |
|---|
| ARTCC: | Fort Worth(ZFW)Fort Worth Center |
|---|
| FSS: | Fort Worth FSS(FTW) |
|---|
| Wind Indicator: | Lighted |
|---|
| Landing Fee: | no |
|---|
| Single Engine GA: | 1 |
|---|
| Total: | 1 |
|---|
|
|
| Owner: | Chad Davidson
201 Cr 24320
Roxton, Tx 75477
706-851-0029
CHADABOON@YAHOO.COM |
|---|
| Manager: | Chad Davidson
201 Cr 24320
Roxton, Tx 75477
706-851-0029 |
|---|
|
Runway 17/35
| Length: | 1800 feet
by Owner on 01/23/2024 |
|---|
| Width: | 75 feet |
|---|
| Surface: | Grass / Sod, Fair Condition |
|---|
| Surface Treatment: | NONE |
|---|
|
End 17 |
End 35 |
|---|
| Right Hand Pattern: | Yes | |
|---|
| Runway Markings: | None | None |
|---|
| Elevation at End: | 510.0' MSL | 513.0' MSL |
|---|
This information is current as of the date at the top of the page. These
pages are valid for all US airports, based on information from FAA National Flight Data Center.
Weather information
is provided based on AvnWx Data Sources. NOTAM information
is from FAA's NAIMES data portal.
As with most information on this website, this page is generated based on FAA data, with
automatic translations done via computer. You can also directly read the A/FD via
the green icon link at the top of the page, which is the FAA text, and
sometimes provides a different translation of codes. Please email
me (using link at top-right of this page) if you see information which is confusing,
misleading, or wrong....Or have suggestions for additions/changes.
Comments from the user community are clearly noted as such this page, are for informational purposes only, may
be wrong and/or out-of-date, and must not be used as a sole source
for critical decision making. See Privacy Policy and
Conditions of Use.
