TX07
Airport
Nix River Ranch Strip
Comstock, Texas

FAA NFDC Information Effective 56-day cycle 04/18/2024 - 6/13/2024

Ops Comms Services Owner Runways IFR Procs Current NOTAMs Remarks

Location

FAA Identifier:TX07 (Tango-Xray-Zero-Seven)
Lat/Lng:29.9342777778, -101.23425
29-56-03.4000N, 101-14-03.3000W
Estimated
Elevation:1820 feet Estimated
Magnetic Variation:08E,(2000), [5E (2024)]
Sectional:SAN ANTONIO
From City:20nm N of Comstock

Operations

Use:Private
Ownership:Privately owned
Activation:11/2000
Control Tower:no
ARTCC:Houston(ZHU)Houston Center
FSS:San Angelo FSS(SJT)
Wind Indicator:Unlighted
Landing Fee:no

Communications

UNICOM:122.800

Services

Based Aircraft

Total:0

Annual Operations

Total:0

Ownership

Owner:Harold Nix
13386 from 557
Pittsburg, Tx 75686-5455
903-645-7333
Manager:Gerry Klingman
Rt 3 Gregg Co Airport
Longview, Tx 75603
903-235-5105

Runways

Runways:16/34

Runway 16/34

Length:6000 feet
Width:75 feet
Surface:Asphalt / Bituminous Concrete
Surface Treatment:NONE
End 16 End 34
Runway Markings:Runway 16/34 White Center Stripe only. Last 1000 ft at Both Ends Solid Stripe,Dashed Stripe in Between. 
Objects:FenceFence
Objects affecting Navigable Airspace (CFR part 77):Utility runway with a visual approachUtility runway with a visual approach
Object Height:10' AGL10' AGL
Object Distance:100' Along centerline100' Along centerline

Procedures

NOTAMs

Additional Remarks

for Cd Contact Laughlin Approach at 830-298-5192, When Approach Closed Contact Houston ARTCC at 281-230-5622.

This information is current as of the date at the top of the page. These pages are valid for all US airports, based on information from FAA National Flight Data Center. Weather information is provided based on AvnWx Data Sources. NOTAM information is from FAA's NAIMES data portal.

As with most information on this website, this page is generated based on FAA data, with automatic translations done via computer. You can also directly read the A/FD via the green icon link at the top of the page, which is the FAA text, and sometimes provides a different translation of codes. Please email me (using link at top-right of this page) if you see information which is confusing, misleading, or wrong....Or have suggestions for additions/changes.

Comments from the user community are clearly noted as such this page, are for informational purposes only, may be wrong and/or out-of-date, and must not be used as a sole source for critical decision making. See Privacy Policy and Conditions of Use.