| UT03
Airport
|
Hite
|
|
Hanksville, Utah
|
|
|
|
FAA NFDC Information Effective 56-day cycle 03/20/2025 - 5/15/2025
| FAA Identifier: | UT03 (Uniform-Tango-Zero-Three) |
|---|
| Lat/Lng: | 37.8916547222, -110.384028889
37-53-29.9570N, 110-23-02.5040W
Estimated |
|---|
| Elevation: | 3840 feet Estimated |
|---|
| Magnetic Variation: | 13E,(1985), [10E (2025)] |
|---|
| Sectional: | DENVER |
|---|
| From City: | 33nm SE of Hanksville |
|---|
| Use: | Private |
|---|
| Ownership: | Publicly owned |
|---|
| Activation: | 04/1976 |
|---|
| Control Tower: | no |
|---|
| ARTCC: | Denver(ZDV)Denver Center |
|---|
| FSS: | Cedar City FSS(CDC) |
|---|
| Wind Indicator: | Unlighted |
|---|
| Landing Fee: | no |
|---|
|
|
|
| Owner: | Glen Canyon Nra
Po Box 1507
Page, Az 86040
928-608-6200 |
|---|
| Manager: | Superintendent
Additional Contact: Chief Ranger 928-608-6253
Glen Canyon Nra, Po Box 1507
Page, Az 86040
928-608-6200 |
|---|
|
Runway E/W
| Length: | 2200 feet |
|---|
| Width: | 40 feet |
|---|
| Surface: | Asphalt / Bituminous Concrete |
|---|
| Surface Treatment: | NONE |
|---|
|
End E |
End W |
|---|
| Objects: | Hills | |
|---|
| • | A30-E/W- |
|---|
| • | for Cd Contact Denver ARTCC at 303-651-4257. |
|---|
This information is current as of the date at the top of the page. These
pages are valid for all US airports, based on information from FAA National Flight Data Center.
Weather information
is provided based on AvnWx Data Sources. NOTAM information
is from FAA's NAIMES data portal.
As with most information on this website, this page is generated based on FAA data, with
automatic translations done via computer. You can also directly read the A/FD via
the green icon link at the top of the page, which is the FAA text, and
sometimes provides a different translation of codes. Please email
me (using link at top-right of this page) if you see information which is confusing,
misleading, or wrong....Or have suggestions for additions/changes.
Comments from the user community are clearly noted as such this page, are for informational purposes only, may
be wrong and/or out-of-date, and must not be used as a sole source
for critical decision making. See Privacy Policy and
Conditions of Use.
