| UT07
Heliport
|
Moab Helibase
|
|
Moab, Utah
|
|
|
|
FAA NFDC Information Effective 56-day cycle 11/27/2025 - 1/22/2026
| FAA Identifier: | UT07 (Uniform-Tango-Zero-Seven) |
|---|
| Lat/Lng: | 38.48163, -109.43582 38-28-53.8680N, 109-26-08.9520W Estimated by Owner on 08/17/2018 |
|---|
| Elevation: | 5010 feet Estimated by Owner on 08/17/2018 |
|---|
| Magnetic Variation: | 15E,(1975), [9E (2025)] |
|---|
| From City: | 7nm SE of Moab |
|---|
| Use: | Private |
|---|
| Ownership: | Privately owned |
|---|
| Activation: | 08/2018 |
|---|
| Control Tower: | no |
|---|
| ARTCC: | Denver(ZDV)Denver Center |
|---|
| FSS: | Denver FSS(DEN) |
|---|
| Wind Indicator: | Lighted |
|---|
| Landing Fee: | no |
|---|
|
|
|
| Owner: | Bureau of Land Mgmt Canyon Co Fire Zone, 90 E Fire Station Rd Moab, Ut 84532 435-259-1850 |
|---|
| Manager: | Travis Moore 90 E Fire Station Rd Moab, Ut 84532 435-259-1850 |
|---|
|
Runway H1
| Length: | 20 feet by Owner on 08/17/2018 |
|---|
| Width: | 20 feet |
|---|
| Surface: | Porland Cement Concrete, Good Condition |
|---|
| Surface Treatment: | NONE |
|---|
Runway H2
| Length: | 20 feet by Ado on 09/09/2025 |
|---|
| Width: | 20 feet |
|---|
| Surface: | Asphalt / Bituminous Concrete, Porland Cement Concrete, Fair Condition |
|---|
| Surface Treatment: | NONE |
|---|
| Remarks: | Tlof Dimensions 20 X 20. Fato Dimensions 400 X 400. Safety Area Dimensions 800 X 800. Primary Ingress/Egress; 330/330 Degs. Secondary Ingress/Egress; 030/030 Degs. |
|---|
This information is current as of the date at the top of the page. These
pages are valid for all US airports, based on information from FAA National Flight Data Center.
Weather information
is provided based on AvnWx Data Sources. NOTAM information
is from FAA's NAIMES data portal.
As with most information on this website, this page is generated based on FAA data, with
automatic translations done via computer. You can also directly read the A/FD via
the green icon link at the top of the page, which is the FAA text, and
sometimes provides a different translation of codes. Please email
me (using link at top-right of this page) if you see information which is confusing,
misleading, or wrong....Or have suggestions for additions/changes.
Comments from the user community are clearly noted as such this page, are for informational purposes only, may
be wrong and/or out-of-date, and must not be used as a sole source
for critical decision making. See Privacy Policy and
Conditions of Use.