| UT16
Heliport
|
Mc Kay-Dee Hospital Center
|
|
Ogden, Utah
|
|
|
|
FAA NFDC Information Effective 56-day cycle 12/25/2025 - 2/19/2026
| FAA Identifier: | UT16 (Uniform-Tango-One-Six) |
|---|
| Lat/Lng: | 41.1829333333, -111.955016667
41-10-58.5600N, 111-57-18.0600W
Estimated by Arpts Contractor on 06/07/2021 |
|---|
| Elevation: | 4662 feet Surveyed by Arpts Contractor on 06/07/2021 |
|---|
| Magnetic Variation: | 11E,(2020), [11E (2025)] |
|---|
| Sectional: | KLAMATH FALLS |
|---|
| From City: | 2nm NW of Ogden |
|---|
| Use: | Private
Medical Use. |
|---|
| Ownership: | Privately owned |
|---|
| Activation: | 04/1972 |
|---|
| Control Tower: | no |
|---|
| ARTCC: | Salt Lake City(ZLC)Salt Lake City Center |
|---|
| FSS: | Cedar City FSS(CDC) |
|---|
| Wind Indicator: | Lighted |
|---|
| Lights: | Sunset-Sunrise |
|---|
| Landing Fee: | no |
|---|
| Fuel: | Jet A - Kerosene, freeze point -40C |
|---|
|
|
|
| Owner: | Mckay-Dee Hospital
4401 Harrison Blvd
Ogden, Ut 84403
801-387-7000 |
|---|
| Manager: | Nick Johnson
Dir of Operations.
250 North 2370 West
Salt Lake City, Ut 84116
801-321-3362 |
|---|
|
Runway H1
| Length: | 61 feet |
|---|
| Width: | 60 feet |
|---|
| Surface: | Porland Cement Concrete |
|---|
| Surface Treatment: | NONE |
|---|
| Runway Lights Edge Intensity: | Perimeter |
|---|
| • | for Cd Contact Salt Lake ARTCC at 801-320-2568. |
|---|
This information is current as of the date at the top of the page. These
pages are valid for all US airports, based on information from FAA National Flight Data Center.
Weather information
is provided based on AvnWx Data Sources. NOTAM information
is from FAA's NAIMES data portal.
As with most information on this website, this page is generated based on FAA data, with
automatic translations done via computer. You can also directly read the A/FD via
the green icon link at the top of the page, which is the FAA text, and
sometimes provides a different translation of codes. Please email
me (using link at top-right of this page) if you see information which is confusing,
misleading, or wrong....Or have suggestions for additions/changes.
Comments from the user community are clearly noted as such this page, are for informational purposes only, may
be wrong and/or out-of-date, and must not be used as a sole source
for critical decision making. See Privacy Policy and
Conditions of Use.
