| UT52
Heliport
|
St. George Regional Hospital
|
|
St George, Utah
|
|
|
|
FAA NFDC Information Effective 56-day cycle 12/25/2025 - 2/19/2026
| FAA Identifier: | UT52 |
|---|
| Lat/Lng: | 37.0989090278, -113.552685 37-05-56.0725N, 113-33-09.6660W Estimated by Arpts Contractor on 06/16/2020 |
|---|
| Elevation: | 2655 feet Estimated by Arpts Contractor on 06/16/2020 |
|---|
| Magnetic Variation: | 11E,(2025), [11E (2025)] |
|---|
| Sectional: | LAS VEGAS |
|---|
| From City: | 1nm NW of St George |
|---|
| Use: | Private Medical Use. |
|---|
| Ownership: | Privately owned |
|---|
| Activation: | 03/1985 |
|---|
| Control Tower: | no |
|---|
| ARTCC: | Los Angeles(ZLA)Los Angeles Center |
|---|
| FSS: | Cedar City FSS(CDC) |
|---|
| Wind Indicator: | Lighted |
|---|
| Lights: | Sunset-Sunrise |
|---|
| Landing Fee: | no |
|---|
| Fuel: | Jet A - Kerosene, freeze point -40C Fuel: Private Use, Prior Permission Required. |
|---|
|
|
|
| Owner: | St. George Regional Hospital 1380 E. Medical Center Dr St George, Ut 84790 435-251-1000 |
|---|
| Manager: | Nick Johnson Dir of Operations. 250 North 2370 West Salt Lake City, Ut 84116 801-321-3362 |
|---|
|
Runway H1
| Length: | 60 feet by Owner on 03/01/1985 |
|---|
| Width: | 50 feet |
|---|
| Surface: | Porland Cement Concrete, Good Condition |
|---|
| Surface Treatment: | NONE |
|---|
| Runway Lights Edge Intensity: | Perimeter |
|---|
| • | for Cd Contact Los Angeles ARTCC at 661-575-2079. |
|---|
This information is current as of the date at the top of the page. These
pages are valid for all US airports, based on information from FAA National Flight Data Center.
Weather information
is provided based on AvnWx Data Sources. NOTAM information
is from FAA's NAIMES data portal.
As with most information on this website, this page is generated based on FAA data, with
automatic translations done via computer. You can also directly read the A/FD via
the green icon link at the top of the page, which is the FAA text, and
sometimes provides a different translation of codes. Please email
me (using link at top-right of this page) if you see information which is confusing,
misleading, or wrong....Or have suggestions for additions/changes.
Comments from the user community are clearly noted as such this page, are for informational purposes only, may
be wrong and/or out-of-date, and must not be used as a sole source
for critical decision making. See Privacy Policy and
Conditions of Use.