| WY21
Heliport
|
Campbell County Meml Hospital
|
|
Gillette, Wyoming
|
|
|
|
FAA NFDC Information Effective 56-day cycle 10/03/2024 - 11/28/2024
| FAA Identifier: | WY21 (Whiskey-Yankee-Two-One) |
|---|
| Lat/Lng: | 44.2902666667, -105.519097222
44-17-24.9600N, 105-31-08.7500W
Estimated by Faa-Est Imagery on 07/26/2014 |
|---|
| Elevation: | 4875 feet Estimated |
|---|
| Magnetic Variation: | 12E,(1995), [8E (2024)] |
|---|
| Sectional: | CHEYENNE |
|---|
| From City: | in Gillette |
|---|
| Use: | Private |
|---|
| Ownership: | Privately owned |
|---|
| Activation: | 02/2000 |
|---|
| Attended: | Continuous |
|---|
| Control Tower: | no |
|---|
| ARTCC: | Denver(ZDV)Denver Center |
|---|
| FSS: | Casper FSS(CPR) |
|---|
| Wind Indicator: | Unlighted |
|---|
| Lights: | Sunset-Sunrise |
|---|
| Landing Fee: | no |
|---|
|
|
|
| Owner: | Campbell County Memorial Hospital
501 South Burma Avenue, P.O. Box 3011
Gillette, Wy 82717-3011
307-688-1441 |
|---|
| Manager: | Matt Pueringer
501 South Burma Avenue
Gillette, Wy 82717-3011
(307) 688-1438 |
|---|
|
Runway H1
| Length: | 100 feet |
|---|
| Width: | 80 feet |
|---|
| Surface: | Porland Cement Concrete |
|---|
| Surface Treatment: | NONE |
|---|
| Runway Lights Edge Intensity: | Perimeter |
|---|
| • | 131 ft Lgtd Tower 100 ft North, 115 ft Lgtd Tower 200 ft West, 222 ft Lgtd Water Tower 1250 ft Southwest & 161 ft Lgtd Water Tank 1500 ft South of Helipad. |
|---|
| • | for Cd Contact Denver ARTCC at 303-651-4257. |
|---|
This information is current as of the date at the top of the page. These
pages are valid for all US airports, based on information from FAA National Flight Data Center.
Weather information
is provided based on AvnWx Data Sources. NOTAM information
is from FAA's NAIMES data portal.
As with most information on this website, this page is generated based on FAA data, with
automatic translations done via computer. You can also directly read the A/FD via
the green icon link at the top of the page, which is the FAA text, and
sometimes provides a different translation of codes. Please email
me (using link at top-right of this page) if you see information which is confusing,
misleading, or wrong....Or have suggestions for additions/changes.
Comments from the user community are clearly noted as such this page, are for informational purposes only, may
be wrong and/or out-of-date, and must not be used as a sole source
for critical decision making. See Privacy Policy and
Conditions of Use.
