XS59
Airport
|
Mellon Ranch
|
Refugio, Texas
|
|
|
|
FAA NFDC Information Effective 56-day cycle 04/18/2024 - 6/13/2024
FAA Identifier: | XS59 |
---|
Lat/Lng: | 28.28084, -97.2113808333 28-16-51.0240N, 097-12-40.9710W Estimated |
---|
Elevation: | 38 feet Estimated |
---|
Magnetic Variation: | 06E,(1995), [3E (2024)] |
---|
Sectional: | SAN ANTONIO |
---|
From City: | 3nm ESE of Refugio |
---|
Use: | Private |
---|
Airspace Analysis: | NOT ANALYZED may be Exempt Under Grandfather Clause |
---|
Ownership: | Privately owned |
---|
Activation: | 07/1965 |
---|
Attended: | All year Mon-Fri 0830-1700 (local) |
---|
Control Tower: | no |
---|
ARTCC: | Houston(ZHU)Houston Center |
---|
FSS: | San Angelo FSS(SJT) |
---|
NOTAMs and Weather: | FDC |
---|
Wind Indicator: | Unlighted |
---|
Landing Fee: | no |
---|
Airframe Repair: | None |
---|
Powerplant Repair: | None |
---|
Multi Engine GA: | 2 |
---|
Jet GA: | 1 |
---|
Helicopter GA: | 4 |
---|
Total: | 7 |
---|
|
|
Owner: | Estate of Thomas O'Connor One O'Connor Plaza, Nr. 1100 Victoria, Tx 77901 512-526-2225 |
---|
Manager: | Larry Tucker One O'Connor Plaza Suite 1100 Victoria, Tx 77901 512-526-2225 |
---|
|
Runway 15/33
Length: | 4650 feet |
---|
Width: | 60 feet |
---|
Surface: | Asphalt / Bituminous Concrete |
---|
Surface Treatment: | NONE |
---|
|
End 15 |
End 33 |
---|
Objects: | | Buildings P L |
---|
• | Extensive Jet & Helicopter Operations-VFR & IFR; for Pmsn Call 512-526-2225. |
---|
• | for Cd Contact Corpus Christi Approach at 361-299-4230. |
---|
This information is current as of the date at the top of the page. These
pages are valid for all US airports, based on information from FAA National Flight Data Center.
Weather information
is provided based on AvnWx Data Sources. NOTAM information
is from FAA's NAIMES data portal.
As with most information on this website, this page is generated based on FAA data, with
automatic translations done via computer. You can also directly read the A/FD via
the green icon link at the top of the page, which is the FAA text, and
sometimes provides a different translation of codes. Please email
me (using link at top-right of this page) if you see information which is confusing,
misleading, or wrong....Or have suggestions for additions/changes.
Comments from the user community are clearly noted as such this page, are for informational purposes only, may
be wrong and/or out-of-date, and must not be used as a sole source
for critical decision making. See Privacy Policy and
Conditions of Use.