Stillwater Medical Center
Stillwater, Oklahoma

FAA NFDC Information Effective 56-day cycle 03/05/2015 - 4/30/2015

Ops Comms Services Owner Runways IFR Procs Current NOTAMs Remarks


FAA Identifier:04OK (Zero-Four-Oscar-Kilo)
Lat/Lng: 36.1153286111, -97.0794794444
36-06-55.1830N, 097-04-46.1260W
Elevation: 984 feet Estimated
Magnetic Variation: 06E, (2000), [4E (2015)]
Sectional: WICHITA
From City: in Stillwater


Use: Private
Ownership: Privately owned
Activation: 08/1982
Attended: Continuous
Control Tower: no
ARTCC: Kansas City Center (ZKC)
FSS: Mc Alester FSS (MLC)
Wind Indicator: Lighted
Landing Fee: no



Based Aircraft

Total: 0

Annual Operations

Total: 0


Owner: Stillwater Medical Center
Po Box 2408
Stillwater, Ok 74076
Manager: Steven Taylor
Po Box 2408
Stillwater, Ok 74074


Runways: H1

Runway H1

Length: 40 feet
by Owner on 10/24/2007
Width: 40 feet
Surface: Pierced Steel Planking / Landing Mats / Membranes
Remarks: Landing Area Now Located on Roof of 1St Floor Directly Over Prev Location on Raised Helipad. Pad Rated for 8,000 Lbs and 40 Ft Wingspan.



Additional Remarks

This information is current as of the date at the top of the page. These pages are valid for all US airports, based on information from FAA National Flight Data Center. Weather information is provided based on AvnWx Data Sources. NOTAM information is from FAA's NAIMES data portal.

As with most information on this website, this page is generated based on FAA data, with automatic translations done via computer. You can also directly read the A/FD via the green icon link at the top of the page, which is the FAA text, and sometimes provides a different translation of codes. Please email me (using link at top-right of this page) if you see information which is confusing, misleading, or wrong....Or have suggestions for additions/changes.

Comments from the user community are clearly noted as such this page, are for informational purposes only, may be wrong and/or out-of-date, and must not be used as a sole source for critical decision making. See Privacy Policy and Conditions of Use.