09MT
Airport
Paint Creek Ranch
Sula, Montana

FAA NFDC Information Effective 56-day cycle 04/18/2024 - 6/13/2024

Ops Comms Services Owner Runways IFR Procs Current NOTAMs Remarks

Location

FAA Identifier:09MT (Zero-Nine-Mike-Tango)
Lat/Lng:45.9093455, -113.763183
45-54-33.6438N, 113-45-47.4588W
Estimated by Ado on 01/22/2024
Elevation:5060 feet Estimated by Ado on 01/22/2024
Magnetic Variation: [12E (2024)]
Sectional:GREAT FALLS
From City:10nm NE of Sula

Operations

Use:Private
Airspace Analysis:Asn:2023-Anm-5267-Nra
Ownership:Privately owned
Activation:01/2024
Control Tower:no
ARTCC:Salt Lake City(ZLC)Salt Lake City Center
FSS:Great Falls FSS(GTF)
Wind Indicator:Lighted
Landing Fee:no

Communications

Services

Based Aircraft

Single Engine GA:1
Total:1

Annual Operations

Total:0

Ownership

Owner:Paint Creek Ranch
Attn: Nick Galyon
2546 East Fork Road
Sula, Mt 59871
561-339-2001
Manager:Nick Galyon
Email: NICKGALYON@ICLOUD.COM
2546 East Fork Road
Sula, Mt 59871
561-339-2001

Runways

Runways:07/25

Runway 07/25

Length:4018 feet
by Ado on 01/22/2024
Width:50 feet
Surface:Grass / Sod
Surface Treatment:NONE
End 07 End 25
Right Hand Pattern: Yes
Elevation at End:5025.0' MSL5087.0' MSL
Objects affecting Navigable Airspace (CFR part 77):Utility runway with a visual approachUtility runway with a visual approach

Procedures

NOTAMs

Additional Remarks


This information is current as of the date at the top of the page. These pages are valid for all US airports, based on information from FAA National Flight Data Center. Weather information is provided based on AvnWx Data Sources. NOTAM information is from FAA's NAIMES data portal.

As with most information on this website, this page is generated based on FAA data, with automatic translations done via computer. You can also directly read the A/FD via the green icon link at the top of the page, which is the FAA text, and sometimes provides a different translation of codes. Please email me (using link at top-right of this page) if you see information which is confusing, misleading, or wrong....Or have suggestions for additions/changes.

Comments from the user community are clearly noted as such this page, are for informational purposes only, may be wrong and/or out-of-date, and must not be used as a sole source for critical decision making. See Privacy Policy and Conditions of Use.