| 0IS2
Heliport
|
Endeavor Health Clinical Operat Glenbrook Hospital
|
|
Glenview, Illinois
|
|
|
|
FAA NFDC Information Effective 56-day cycle 04/18/2024 - 6/13/2024
| FAA Identifier: | 0IS2 (Zero-India-Sierra-Two) |
|---|
| Lat/Lng: | 42.093525, -87.8527888889
42-05-36.6900N, 087-51-10.0400W
Estimated by State on 11/01/2016 |
|---|
| Elevation: | 675 feet Estimated by State on 11/01/2016 |
|---|
| Magnetic Variation: | [-4W (2024)] |
|---|
| Sectional: | CHICAGO |
|---|
| From City: | 2nm W of Glenview |
|---|
| Use: | Private |
|---|
| Airspace Analysis: | CONDITIONAL
Provided Ingress/Egress Limited to 223 Deg to 266 Deg Using the Pad As Center of Compass Rose. |
|---|
| Ownership: | Privately owned |
|---|
| Activation: | 04/1982 |
|---|
| Attended: | Continuous |
|---|
| Control Tower: | no |
|---|
| ARTCC: | Chicago(ZAU)Chicago Center |
|---|
| FSS: | Kankakee FSS(IKK) |
|---|
| Wind Indicator: | Unlighted |
|---|
| Lights: | Sunset-Sunrise |
|---|
| Landing Fee: | no |
|---|
|
|
|
| Owner: | Endeavor Health Clinical Operation
2650 Ridge Ave
Evanston, Il 60201
847-570-2000 |
|---|
| Manager: | Tom Stone
Endeavor Health Clinical Oglenbrook, 2100 Pfingsten Rd
Glenview, Il 60025
847-657-5600 |
|---|
|
Runway H1
| Length: | 60 feet |
|---|
| Width: | 60 feet |
|---|
| Surface: | Porland Cement Concrete |
|---|
| Surface Treatment: | NONE |
|---|
| Runway Lights Edge Intensity: | Fld Intensity |
|---|
| • | for Cd Contact Chicago Approach at 847-289-0926. |
|---|
This information is current as of the date at the top of the page. These
pages are valid for all US airports, based on information from FAA National Flight Data Center.
Weather information
is provided based on AvnWx Data Sources. NOTAM information
is from FAA's NAIMES data portal.
As with most information on this website, this page is generated based on FAA data, with
automatic translations done via computer. You can also directly read the A/FD via
the green icon link at the top of the page, which is the FAA text, and
sometimes provides a different translation of codes. Please email
me (using link at top-right of this page) if you see information which is confusing,
misleading, or wrong....Or have suggestions for additions/changes.
Comments from the user community are clearly noted as such this page, are for informational purposes only, may
be wrong and/or out-of-date, and must not be used as a sole source
for critical decision making. See Privacy Policy and
Conditions of Use.
