| 0XA0
Heliport
|
Parkland Hospital Nr 2
|
|
Dallas, Texas
|
|
|
|
FAA NFDC Information Effective 56-day cycle 05/02/2013 - 6/27/2013
| FAA Identifier: | 0XA0 (Zero-Xray-Alpha-Zero) |
| Lat/Lng: |
32.8113583333, -96.8388333333
32-48-40.8900N, 096-50-19.8000W
Estimated by OWNER on 08/25/2005
|
| Elevation: |
548 feet
Estimated
by OWNER
on 08/25/2005
|
| Magnetic Variation: |
[4E (2013)]
|
| Sectional: |
DALLAS-FT WORTH
|
| From City: |
3nm
NW of Dallas
|
| Use: |
Private
Medical.
|
| Ownership: |
Privately owned
|
| Activation: |
05/2006
|
| Control Tower: |
no
|
| ARTCC: |
Fort Worth Center
(ZFW)
|
| FSS: |
Fort Worth FSS
(FTW)
|
| Wind Indicator: |
Unlighted
|
| Lights: |
for Perimeter Lights H1 & H2 - 463.025.
|
| Beacon: |
for Rotating Beacon - 463.025.
Clear-Green-Yellow (Heliport)
|
| Landing Fee: |
no
|
| UNICOM: |
Channel 1 - 463.0; Channel 4 - 463.075 & Channel 2 - 463.025.
|
|
|
|
| Owner: |
Dallas County Hospital District
5201 Harry Hines Blvd
Dallas, Tx 75235
214-590-8006
or 214-590-8949.
|
| Manager: |
Suzanne Hewitt
5201 Harry Hines Blvd
Dallas, Tx 75235
214-590-8848
|
|
Runway H1
| Length: |
61 feet
by Owner on 08/25/2005
|
| Width: |
54 feet
|
| Surface: |
Porland Cement Concrete
|
| Runway Lights Edge Intensity: |
Perimeter
|
Runway H2
| Length: |
56 feet
by Owner on 08/25/2005
|
| Width: |
56 feet
|
| Surface: |
Porland Cement Concrete
|
| Runway Lights Edge Intensity: |
Perimeter
|
| • | Helipad 'H1' is Located 650 Ft North of 'H2'. |
| • | Owner Desires Heliport not be Charted. |
This information is current as of the date at the top of the page. These
pages are valid for all US airports, based on information from FAA National Flight Data Center.
Weather information
is provided based on AvnWx Data Sources. NOTAM information
is from FAA's NAIMES data portal.
As with most information on this website, this page is generated based on FAA data, with
automatic translations done via computer. You can also directly read the A/FD via
the green icon link at the top of the page, which is the FAA text, and
sometimes provides a different translation of codes. Please email
me (using link at top-right of this page) if you see information which is confusing,
misleading, or wrong....Or have suggestions for additions/changes.
Comments from the user community are clearly noted as such this page, are for informational purposes only, may
be wrong and/or out-of-date, and must not be used as a sole source
for critical decision making. See Privacy Policy and
Conditions of Use.