1MD1
Airport
Big Oak Farm
Cambridge, Maryland

FAA NFDC Information Effective 56-day cycle 07/24/2014 - 9/18/2014

Ops Comms Services Owner Runways IFR Procs Current NOTAMs Remarks

Location

FAA Identifier:1MD1 (One-Mike-Delta-One)
Lat/Lng: 38.5690094444, -76.2863355556
38-34-08.4340N, 076-17-10.8080W
Estimated
Elevation: 4 feet Estimated
Magnetic Variation: 10W, (1985), [-11W (2014)]
Sectional: WASHINGTON
From City: 14nm W of Cambridge

Operations

Use: Private
Ownership: Privately owned
Activation: 12/1980
Control Tower: no
ARTCC: Washington Center (ZDC)
FSS: Leesburg FSS (DCA)
Wind Indicator: Unlighted
Landing Fee: no

Communications

Services

Based Aircraft

Single Engine GA: 1
Total: 1

Annual Operations

Total: 0

Ownership

Owner: Hugh B. Horning
629 Hills Point Road
Cambridge, Md 21613
410-228-7521
or 302-655-6191
Manager: Hugh B. Horning
629 Hills Point Cove Rd 3
Cambridge, Md 21613
410-228-7521

Runways

Runways: E/W

Runway E/W

Length: 1600 feet
Width: 75 feet
Surface: Grass / Sod
End E End W
Displaced Threshold Distance: 200'
W Displaced Threshold Marked with One Cone Each Side of Runway.
300'
Objects:   Trees
Fence East End of Runway.
Object Height:   60' AGL
Object Distance:   1000' Along centerline

Procedures

NOTAMs

Additional Remarks

A30-E/W-Private Drive Crosses Runway 300 Ft from Threshold at West End.
Military Jets Low Flying in Area.

This information is current as of the date at the top of the page. These pages are valid for all US airports, based on information from FAA National Flight Data Center. Weather information is provided based on AvnWx Data Sources. NOTAM information is from FAA's NAIMES data portal.

As with most information on this website, this page is generated based on FAA data, with automatic translations done via computer. You can also directly read the A/FD via the green icon link at the top of the page, which is the FAA text, and sometimes provides a different translation of codes. Please email me (using link at top-right of this page) if you see information which is confusing, misleading, or wrong....Or have suggestions for additions/changes.

Comments from the user community are clearly noted as such this page, are for informational purposes only, may be wrong and/or out-of-date, and must not be used as a sole source for critical decision making. See Privacy Policy and Conditions of Use.