28AR
Airport
Henley Aerodrome
Charlotte, Arkansas

FAA NFDC Information Effective 56-day cycle 11/13/2014 - 1/8/2015

Ops Comms Services Owner Runways IFR Procs Current NOTAMs Remarks

Location

FAA Identifier:28AR
Lat/Lng: 35.8333333333, -91.4333333333
35-50-00.0000N, 091-26-00.0000W
Estimated by OWNER on 01/23/2004
Elevation: 377 feet Estimated by OWNER on 01/23/2004
Magnetic Variation: [0W (2014)]
Sectional: MEMPHIS
From City: 12nm W of Charlotte

Operations

Use: Private
Ownership: Privately owned
Activation: 02/2005
Control Tower: no
ARTCC: Memphis Center (ZME)
FSS: Jonesboro FSS (JBR)
Wind Indicator: Lighted
Landing Fee: no

Communications

Services

Based Aircraft

Single Engine GA: 5
Total: 5

Annual Operations

Total: 0

Ownership

Owner: Don Henley
230 N. Charlotte Road
Sulpher Rock, Ar 72579
870-799-2449
Manager: Don Henley
Other Contact: Mark Henley 80 Skyview St. Batesville Ar 72501 870-834-4530
230 N. Charlotte Road
Sulpher Rock, Ar 72579
870-799-2449

Runways

Runways: 18/36

Runway 18/36

Length: 3100 feet
by Owner on 01/23/2004
Width: 75 feet
Surface: Grass / Sod
End 18 End 36
Objects:   Powerline
Objects affecting Navigable Airspace (CFR part 77): Utility runway with a visual approach Utility runway with a visual approach
Object Height:   50' AGL
Object Distance:   1000' Along centerline

Procedures

NOTAMs

Additional Remarks


This information is current as of the date at the top of the page. These pages are valid for all US airports, based on information from FAA National Flight Data Center. Weather information is provided based on AvnWx Data Sources. NOTAM information is from FAA's NAIMES data portal.

As with most information on this website, this page is generated based on FAA data, with automatic translations done via computer. You can also directly read the A/FD via the green icon link at the top of the page, which is the FAA text, and sometimes provides a different translation of codes. Please email me (using link at top-right of this page) if you see information which is confusing, misleading, or wrong....Or have suggestions for additions/changes.

Comments from the user community are clearly noted as such this page, are for informational purposes only, may be wrong and/or out-of-date, and must not be used as a sole source for critical decision making. See Privacy Policy and Conditions of Use.