| 29KY
Ultralight
|
Cramer Aerodrome
|
|
Hopkinsville, Kentucky
|
|
|
|
FAA NFDC Information Effective 56-day cycle 05/02/2013 - 6/27/2013
| FAA Identifier: | 29KY |
| Lat/Lng: |
36.8931, -87.4272272222
36-53-35.1600N, 087-25-38.0180W
Estimated
|
| Elevation: |
640 feet
Estimated
|
| Magnetic Variation: |
00W,
(1985),
[-3W (2013)]
|
| Sectional: |
ST LOUIS
|
| From City: |
3nm
NE of Hopkinsville
|
| Use: |
Private
|
| Airspace Analysis: |
CONDITIONAL
Provided VFR, Pvt Use only.
|
| Ownership: |
Privately owned
|
| Activation: |
08/1985
|
| Control Tower: |
no
|
| ARTCC: |
Memphis Center
(ZME)
|
| FSS: |
Louisville FSS
(LOU)
|
| Wind Indicator: |
Unlighted
|
| Landing Fee: |
no
|
|
|
|
| Owner: |
Daniel Cramer
P.O. Box 2695
Clarksville, Tn 37042
931-648-1115
|
| Manager: |
Daniel Cramer
P.O. Box 2695
Clarksville, Tn 37042
931-648-1115
|
|
Runway 09/27
| Length: |
1700 feet
|
| Width: |
25 feet
|
| Surface: |
Asphalt / Bituminous Concrete
|
|
End 09 |
End 27 |
| Objects affecting Navigable Airspace (CFR part 77): |
Utility runway with a visual approach
|
Utility runway with a visual approach
|
This information is current as of the date at the top of the page. These
pages are valid for all US airports, based on information from FAA National Flight Data Center.
Weather information
is provided based on AvnWx Data Sources. NOTAM information
is from FAA's NAIMES data portal.
As with most information on this website, this page is generated based on FAA data, with
automatic translations done via computer. You can also directly read the A/FD via
the green icon link at the top of the page, which is the FAA text, and
sometimes provides a different translation of codes. Please email
me (using link at top-right of this page) if you see information which is confusing,
misleading, or wrong....Or have suggestions for additions/changes.
Comments from the user community are clearly noted as such this page, are for informational purposes only, may
be wrong and/or out-of-date, and must not be used as a sole source
for critical decision making. See Privacy Policy and
Conditions of Use.