Cedar Mills
Gordonville, Texas

FAA NFDC Information Effective 56-day cycle 06/22/2017 - 8/17/2017

Ops Comms Services Owner Runways IFR Procs Current NOTAMs Remarks


FAA Identifier:3T0 (Three-Tango-Zero)
Lat/Lng: 33.8393460833, -96.8100689722
33-50-21.6459N, 096-48-36.2483W
Estimated by REGION on 08/06/2003
Elevation: 640 feet Estimated
Magnetic Variation: 06E, (1995), [3E (2017)]
From City: 3nm N of Gordonville


Use: Open to the public
Ownership: Privately owned
Activation: 12/1997
Control Tower: no
ARTCC: Fort Worth Center (ZFW)
FSS: Fort Worth FSS (FTW)
NOTAMs and Weather: FTW NOTAM-D service at airport
Wind Indicator: Unlighted
Segmented Circle: yes
Landing Fee: no


CTAF: 122.900


Transient Storage: Tie-Down

Based Aircraft

Single Engine GA: 2
Total: 2

Annual Operations

For year ending: 07/28/2016
Local GA (< 20 miles): 100
Non-local GA: 500
Total: 600


Owner: Cedar Mills Marina
500 Harbour View
Gordonville, Tx 76245
Manager: Kris Worstell
500 Harbour View
Gordonville, Tx 76245


Runways: 07/25

Runway 07/25

Length: 3000 feet
Width: 60 feet
Surface: Grass / Sod, Excellent Condition
End 07 End 25
Objects: Trees Tree
Objects affecting Navigable Airspace (CFR part 77): Utility runway with a visual approach Utility runway with a visual approach
Object Clearance Slope: 9:1 0:1
Object Height: 36' AGL 26' AGL
Object Distance: 340' Along centerline
12' Along centerline
111' Right of centerline



Additional Remarks

+40 Ft Trees 75 Ft N & 80 Ft Trees 90 Ft S of Runway 25 Centerline.

This information is current as of the date at the top of the page. These pages are valid for all US airports, based on information from FAA National Flight Data Center. Weather information is provided based on AvnWx Data Sources. NOTAM information is from FAA's NAIMES data portal.

As with most information on this website, this page is generated based on FAA data, with automatic translations done via computer. You can also directly read the A/FD via the green icon link at the top of the page, which is the FAA text, and sometimes provides a different translation of codes. Please email me (using link at top-right of this page) if you see information which is confusing, misleading, or wrong....Or have suggestions for additions/changes.

Comments from the user community are clearly noted as such this page, are for informational purposes only, may be wrong and/or out-of-date, and must not be used as a sole source for critical decision making. See Privacy Policy and Conditions of Use.