| 49CN
Airport
|
Rancho Tehama
|
|
Red Bluff, California
|
|
|
|
FAA NFDC Information Effective 56-day cycle 04/18/2024 - 6/13/2024
| FAA Identifier: | 49CN |
|---|
| Lat/Lng: | 40.0159880556, -122.3899975
40-00-57.5570N, 122-23-23.9910W
Estimated |
|---|
| Elevation: | 550 feet Estimated |
|---|
| Magnetic Variation: | 17E,(1985), [13E (2024)] |
|---|
| Sectional: | KLAMATH FALLS |
|---|
| From City: | 10nm SW of Red Bluff |
|---|
| Use: | Private |
|---|
| Ownership: | Privately owned |
|---|
| Activation: | 07/1971 |
|---|
| Control Tower: | no |
|---|
| ARTCC: | Oakland(ZOA)Oakland Center |
|---|
| FSS: | Rancho Murieta FSS(RIU) |
|---|
| Wind Indicator: | Unlighted |
|---|
| Landing Fee: | no |
|---|
| Airframe Repair: | None |
|---|
| Powerplant Repair: | None |
|---|
| Single Engine GA: | 2 |
|---|
| Ultralights: | 1 |
|---|
| Total: | 3 |
|---|
|
|
| Owner: | Rancho Tehama Association
Rtr Box 5111
Corning, Ca 96021
530-585-2444 |
|---|
| Manager: | Doug Dugger
Rtr Box 5111
Corning, Ca 96021
530-585-2444 |
|---|
|
Runway 09/27
| Length: | 3750 feet |
|---|
| Width: | 40 feet |
|---|
| Surface: | Oil&Chip, T, Good Condition |
|---|
| Surface Treatment: | NONE |
|---|
|
End 09 |
End 27 |
|---|
| Right Hand Pattern: | | Yes |
|---|
| Runway Markings: | Dthr Both Ends with Numbers & Letter R. | |
|---|
| Objects affecting Navigable Airspace (CFR part 77): | Utility runway with a visual approach | Utility runway with a visual approach |
|---|
| • | for Cd Contact Oakland ARTCC at 510-745-3380. |
|---|
This information is current as of the date at the top of the page. These
pages are valid for all US airports, based on information from FAA National Flight Data Center.
Weather information
is provided based on AvnWx Data Sources. NOTAM information
is from FAA's NAIMES data portal.
As with most information on this website, this page is generated based on FAA data, with
automatic translations done via computer. You can also directly read the A/FD via
the green icon link at the top of the page, which is the FAA text, and
sometimes provides a different translation of codes. Please email
me (using link at top-right of this page) if you see information which is confusing,
misleading, or wrong....Or have suggestions for additions/changes.
Comments from the user community are clearly noted as such this page, are for informational purposes only, may
be wrong and/or out-of-date, and must not be used as a sole source
for critical decision making. See Privacy Policy and
Conditions of Use.
